Sub-station

ShIP to

Four different material bathtub maintenance tips

by:KingKonree     2021-05-17

Acrylic plastic bathtub is light in weight, does not rust, will not be corroded, feels warm, can maintain the water temperature for a long time, and is easy to wipe clean. This kind of bathtub is currently the mainstream product on the market.

When the bathtub is maintained, you can choose a suitable polishing machine, a wool polishing disk of around 1900 rpm, apply wax to the polishing disk, and then polish the polished part. Before sanding, the surface should be repaired with sandpaper. Repeat this process several times, and then it will reach a bright surface.

The polishing wax is selected from high-quality products. Car polishing wax can be used. For small scratches or getting old, manual polishing can be used: After polishing with 1500 water-resistant paper, use car surface abrasives to rotate repeatedly. Actions to make the surface bright, and even toothpaste can be used instead of abrasives, but the grinding time is relatively much longer. The surface of the acrylic bathtubs of major brands has been specially treated, which is more abrasion resistant than ordinary acrylic bathtubs. In case of accidental scratches on the surface, if the scratches are light, lightly brush with toothpaste and a toothbrush; if the scratches are deep, it is recommended to consult professionals and ask professional maintenance personnel to deal with it.

The paint gelatin on the bathtub can be cleaned with turpentine water. Many chemicals can cause acrylic to lose its luster, such as thinner. Usually only need to clean with No. 1 detergent, do not use corrosive detergent.

Cast iron bathtub is a very heavy and durable material. The enamel on its surface is generally thinner than that on steel bathtubs. You cannot use abrasive cleaners when cleaning this bathtub. The disadvantages of this bathtub It is the water that quickly becomes cold. Cast iron bathtubs are usually cumbersome (except for tens of thousands of high-end products), expensive, and not very good in heat preservation. But its advantage is its long service life.

The bathtub can be cleaned with acid-free detergent, and the non-abrasive soft sponge pad can be used to clean the dirt that is difficult to remove on the non-slip surface of the bathtub.

The cast iron bathtub** is prone to scratches. If there are rusty scratches, first remove the rust spots with a decontamination powder, then wipe with a dry cloth, and then apply a special adhesive for repairing the bathtub, and the scratches will not expand. To clean the bathtub, you must use a sponge and detergent instead of a hard brush.

When the wooden barrel leaves the factory, it will be coated with a layer of tung oil, so in the first few days of the purchase, you must keep the bathroom air ventilated and open the window regularly to avoid pungent smells in the home . **Water seepage occurs in the initial test. This is a normal phenomenon. After filling the water, you should soak for more than 12 hours to fully infiltrate the wooden barrel. The seepage phenomenon of the wooden barrel will stop. If there is any problem, you should contact the manufacturer in time.

Because the wood itself will expand and contract with heat, it should not be directly exposed to the sun or exposed to cold wind. If it is not used for a long time for more than two months, the wooden barrel can be soaked and sealed with a large plastic bag to avoid The air takes away moisture. It is best to put a little water when not in use to make it absorb water and keep the wood saturated and moist, but not too much water, because the bathroom itself has a certain amount of humidity. Pay attention not to keep the dirty water after bathing, so as to prevent the wood from absorbing sewage and accelerating aging or producing mildew.

After the barrel has been used for a period of time, the iron wire fixed on the outside of the barrel will loosen a little. At this time, the barrel can be upside down first, then the iron wire is tightened, and hot water is added to continue using. The thickness of the wood on the wall of the wooden barrel will vary. Generally, a wooden barrel with a wall thickness of 2 cm to 3 cm is selected for the best heat preservation effect.

Tips for bathtub maintenance:

1. Clean the bathtub every week to ensure that the bathtub stays dry after each use.

2. To clean the bathtub, you can use a neutral liquid detergent and use a flexible cloth or a good sponge.

3. Do not use abrasive and highly alkaline cleaning products.

4. Avoid the use of dark-colored detergents, which may cause pigments to penetrate the surface of the tank.

5. After using the hose, don't forget to turn off the water system to avoid frequent dripping and water accumulation in the bathtub.

6. If there is any damage to the bathtub, immediately notify the relevant company to repair it, so as to prevent the problem from getting worse.

7. Do not leave metal objects in the bathtub. They will rust and stain the surface of the bathtub.

Custom message
暂无友情链接数据
Chat Online 编辑模式下无法使用
Leave Your Message inputting...