< img height="1" width="1" style="display:none;" alt="" src="https://px.ads.linkedin.com/collect/?pid=5785916&fmt=gif" />

KingKonree - Solid Surface Manufacturer of Sanitary Ware, Solid Surface Countertops & Sheets for over 24 years, innovation in moulding and thermoforming

Meet KingKonree(KKR) at 135th Canton Fair: Booth No: 11.1 C05-06. April 23th to 27th 2024

Novice owners look at these 10 pits in bathroom decoration!

by:KingKonree     2021-07-22
Novice owners look at these 10 pits in bathroom decoration!


Release time: 2020-12-18 15:16:47; Update time: 2020/12/18 15:27:09; Article source:; Views: 400
   According to relevant statistics of the sanitary ware industry, more than 50% of novice owners will regret it after the renovation, because there are many unreasonable places when using the bathroom, such as not drying and wet separation, waterproofing Problems such as bad or water leaking will be exposed one by one. This is the result of not being able to do homework before the renovation. In this regard, the editor has selected some mistakes that are easy to make during bathroom decoration, and shared with consumers who are preparing to decorate at home how to avoid pits, so that you will not regret it after the decoration!  1, the waterproof layer is too thick   the bathroom waterproof is extremely important, not only the material should be good, but also the painting as required. The waterproof layer should not be too thick. Too thick can easily lead to cracks in the layer, resulting in water seepage and water leakage, and tiles falling off; too thin can easily be damaged in subsequent construction. Therefore, it can be divided into 2-3 times of 'thin coating and more coatingThe wall waterproof is best to be 180cm high. 2. It is very necessary to separate dry and wet toilets in dry and wet areas. Not only does it have a high safety factor, but also does not splash water everywhere. It improves cleaning efficiency, use efficiency, is healthy, beautiful and easy to take care of, and it extends bathroom furniture. Service life. If the area is large enough, you can also consider the 'three separations  3, the toilet is not sloped  The drainage of the bathroom is very important, so the floor must be sloped in order to drain more smoothly. Generally, the slope of the bathroom is about 5%. If you need more efficient drainage function, you can ask the bricklayer to increase the slope appropriately.  4. Tiles are not selected. For the bathroom floor, you must choose non-slip materials to protect the safety of your family, such as non-slip tiles. Don't choose uneven tiles, because the bathroom is relatively damp, and the recessed part is easy to mold and blacken. Tile beautifying agent should also choose the special beautifying agent for bathroom, which can prevent mildew, waterproof and anti-oxidation.  5. The floor drain is not installed.    The floor drain cannot be placed in the middle of the bathroom, because no matter how the floor tiles are tilted, the middle will not be the lowest point, which is prone to water accumulation. In addition, it is recommended to choose a plumb-type floor drain to drain water quickly, with good airtightness and higher cost performance.  6. u200bu200bBuying low-quality toilets for cheap   The price of toilets varies greatly, ranging from a few hundred yuan to a few thousand yuan. Some people are greedy to buy low-quality toilets, which not only affects the use experience, but may also be dangerous. It is recommended that the toilet is to choose a trusted brand, the quality is guaranteed, and it is more assured to use. How to choose a toilet? There are two types of toilets in the market: ordinary toilets and smart toilets. The difference between the two is that smart toilets have a series of intelligent functions such as smart induction, seat heating, flushing, and quick drying, which are more convenient and have a better experience. . Due to the characteristics of the toilet, it is necessary to consider the advantages of antibacterial and sanitary, easy to clean, strong and safe, clean and water-saving when purchasing a toilet.  7. The pipeline is not done well    The water and electricity are not done well, the decoration is equal to zero. The bathroom is the place where the water circuit gathers. If the water and electricity leaks due to problems in the design and material selection after installation, the cost of rework is not a small amount. Therefore, in the early stage, it is necessary to select good quality water pipes, electric wires, and electric wires, and the wiring must comply with the regulations.   8. Ventilation    It is best to design windows in the bathroom decoration to facilitate ventilation; if there are no windows that hinder ventilation, special attention should be paid to the design of exhaust fans and ducts. And the gap between the bathroom door and the ground should be larger to facilitate the return of the air.  9. No heating equipment installed   The bathroom needs to be equipped with heating equipment, especially in winter, when the temperature difference is large, it is easy to catch cold.  10. Buy low-quality sanitary products for cheap    Sanitary wares should be replaced very rarely. If you buy inferior products for cheap, not only problems occur every three days, the replacement is troublesome and costly, and it is extremely easy to bring safety hazards.   In short, the humble era of the bathroom has passed. In the current society, the bathroom is the key to determining the taste and quality of life of a family. In addition to the installation of water and electricity, the biggest cost of the bathroom is the choice of bathroom furniture and the experience of use, so don't buy products that 'use it and regret it' for cheap.




Previous post: How can we make money to join an agent in the sanitary ware industry?
Next: Talking about bathroom decoration details and feng shui taboos
Custom message
暂无友情链接数据
Chat Online 编辑模式下无法使用
Leave Your Message inputting...