Rifeng Sanitary Ware explains common problems and solutions in sink decoration

Rifeng Sanitary Ware explains common problems and solutions for sink decoration. The sink is essential for every family. The kitchen, bathroom, vanity and other places in the home need to use the sink, but we will inevitably when we decorate the sink. I have encountered some problems, today I will explain to you the common problems and solutions of sink decoration. The content is as follows, and I will show you in the way of one question and one answer: Q: Why is the stainless steel of the sink magnetic? A: The stainless steel plate sink itself is not magnetic. Yes, but in the process of stretching into a basin, the sheet metal crystal structure will be deformed by high-pressure extrusion, and a small amount of martensite structure will be produced. This structure is slightly magnetic, and the magnetism will be greater in places with large tensile deformation. Therefore, the stretched part of the basin body will have a little magnetism, especially the four rounded corners have the largest stretch deformation, and the magnetism is also slightly stronger. The panel has little tensile deformation and is almost non-magnetic. At present, some products on the market are not magnetic because they have been demagnetized. Q: Why does the water tank change color if it is placed for a long time? A: Stainless steel itself does not change color. However, some sinks have been placed for a long time, especially on display shelves, the color will become dim, and some will even have mildew. This is because the sink has been placed for a long time, especially in the display time. The dust is hidden in the frosted seam on the surface of the basin, which reduces the surface finish of the product, and some even produce mildew when it encounters moisture. If this happens, just wipe it with a gauze moistened with detergent or talcum powder. Q: Is the floating rust on the bottom of the basin a quality problem? A: It is not a quality problem. It is mostly caused by the siltation of metal impurities in the water pipes of newly decorated rooms on the bottom of the basin. It can be wiped with toothpaste or talcum powder, it will disappear naturally after normal use. Note: When using stainless steel sinks, generally do not use concentrated disinfectant for disinfection, so as not to damage the surface of the stainless steel. Q: Why is the water removal part of the sink very important? A: Due to the large amount of washing in Chinese household kitchens, a large amount of pre-meal washing preparations and a large amount of post-meal utensils cleaning will produce scum debris and oily water caused by washing. . If the dewatering device only has the function of holding water during washing and dewatering after washing, it cannot filter out the debris in the water, which will cause poor drainage and cause pipeline blockage. Therefore, it is very important to choose a good sink dewatering device. Q: Will stainless steel rust? A: Under normal use, stainless steel sink products will not rust, but if the sink is used improperly, 'moldPhenomenon. This is because the water tank is not thoroughly cleaned after use, and the dirt adheres to the surface. The sink must be kept clean to avoid the risk of mildew and rust. When the sink also 'grows mildew' or 'rusts' accidentally, you can deal with it according to the special instructions attached to the inner wall of the basin. Q: What are the characteristics of the embossed board? A: The embossed board is formed by pressing patterns on the basis of ordinary stainless steel plates. The embossed board has a strong and beautiful appearance, higher surface hardness, and more wear resistance. Of course, the price of materials is also very high. (