Shower room: six purchase tips for shower room brands

Shower room: six purchase tips for shower room brands Zhongshan shower room is easy to install, relatively independent and concise, with a strong sense of transparency, and does not block the overall tile paving effect of the bathroom. The bathing function is basically complete. Moreover, the styles are rich, and the shower room can be customized with the shower room manufacturer according to the actual size of the bathroom, so the shower room is welcomed by the public. So, how to choose a high-quality shower room? Today we will teach you buying skills. 1. Look at the thickness of the glass in the simple glass shower room. When choosing the glass, you should also consider its thickness and load-bearing. Don't choose too thick. The glass area is too large and the weight will not be good. Generally 8mm is enough, normal The glass thickness of the shower room manufacturer is generally 8mm. (1) Check whether the glass is transparent, whether there are defects such as dots and bubbles. Brief analysis: The impurity of the glass material or the defects of the craftsmanship will cause the glass to have defects such as dots and bubbles, and reduce the hardness and strength of the glass. (2) See if there is 3c mark certification on the original glass. Brief analysis: 3c certification is the abbreviation of China Compulsory Product Certification. Shower room products cannot be sold without this mark. (3) Look at the model of fully tempered glass fragments. Brief analysis: According to the national standard, the safety amount of toughened glass per 50*50mm area must reach more than 40 pieces. 2. Look at the hardware hinges and beams. When choosing the frameless shower room of the shower room manufacturer, the hardware hinges and beams are the key. To be safe, choose a glass with a thickness of 10mm, which will be safer after filming. In fact, there are additional alloy beams on the top of the fence, and the other ends of the beams are fixed on the walls on both sides, which is a lot safer and more stable. 3. Look at the brand products of the shower room that looks like the corner split type, which is suitable for the smaller bathroom space. It is convenient to choose this kind of shower room and saves space, but it is necessary to clean the slideway frequently, so that the sliding door will move more smoothly. 4. When you look at the details, you must pay attention to the details when purchasing. The hinges, sealing strips, slide rails, and handles should all be tried. Pay attention to the details of the product. In addition to other key considerations, the connection between glass and glass, and glass and wall The sealing strip is also very important. Good quality shower room sealing strips should not have breakpoints at the hinges, and the sealing strips between the glass doors should be magnetic, so that the water-retaining performance will be better. 5. Look at pulleys and pull rods. If you buy a shower room with sliding doors, you can test whether the pulley is smooth when pulled, whether the pulley and aluminum track fit tightly, whether it is easy to fall off when impacted by external force, etc., whether water vapor is easy to enter the wheels, etc. ;Secondly, it is recommended that the tie rods of the shower room should be a ring rod, straight rod, oblique rod, etc. with strong stability. 6. Looking at the material and certificate, you can carefully observe whether there are blisters, scratches, etc. on the surface of the aluminum alloy; whether the tempered glass is transparent, whether there are blisters, knots, etc.; hardware accessories include handles, pull rods, pulleys and bases, etc. The electroplating layer on the surface is also better with high smoothness, no blistering and anti-corrosion; in the production process, you can focus on observing the joints between the aluminum and tempered glass, the fit and tightness of the tempered glass door and the waterproof glue, and the guide rail The material of the pulley and the sealing of the wheel seat; industry insiders say that the hardness of qualified shower room aluminum must be at least 12 degrees or more, and the thickness must be at least 1.2mm. The aluminum glass for hanging on the rail must be 1.5mm or more. Usually you can test the hardness of the aluminum material by pressing the aluminum frame by hand, or you can do pull-ups on the aluminum material in the shower room to test the strength of the aluminum material and the overall firmness of the shower room. It can focus on checking whether there are 3C certification marks, product quality inspection certificates and patent certificates on the original tempered glass. Among them, 3C certification is the abbreviation of China Compulsory Product Certification. (