Things to pay attention to before installing stainless steel shower room profiles

Hongpin bathroom stainless steel shower room profiles should be noted before installation. First, before installation, check whether the location of the shower room meets the requirements, whether the floor is cleaned, and whether the sewer pipe is unblocked. Second, after unpacking the shower room, pay attention to placing the glass vertically against the wall steadily. Horizontal or uneven placement may cause damage to the glass, resulting in property damage and even personal injury. The third is to be careful when transporting. The horizontal transport of the shower room may cause the glass to break. It must be transported vertically by two or more people, and pay attention to avoid collision with hard objects. Fourth, the stability of the installation of the bottom basin is related to the stability of the entire house. When installing, adjust the supporting feet to make the cylinder body level in a horizontal state. If the installation is not level, the glass may burst. Fifth, the shower room must be firmly connected to the wall without shaking. The open shower room must be fixed to the non-hollow wall with expansion bolts. Sixth, in order to install firmly and fit tightly, pay attention to cleaning the installation surface of the shower room and the siding before applying glass glue. Seventh, before connecting the hot and cold water mixer to the hot and cold water pipes, be sure to remove impurities and dirt in the water pipes to avoid clogging the faucet and affecting the water outlet and the life of the faucet. Eighth, after putting the falling water hose into the drainage pipe, pay attention to waterproof the surrounding area to prevent ground water from flowing downstairs along the pipe. Ninth, the joints inside the whole house and the place where the bottom basin connects with the main board should be waterproofed. Pay special attention to some places that are prone to water seepage. Excess silicone should be cleaned up in time. Tenth, when installing accessories such as massagers, hand showers, towel racks, etc., be careful to handle them gently, and install them firmly. The eleventh is to check and debug some details after the shower room is installed, especially if it is easier to leak. (