Bathroom maintenance knowledge, various bathtub maintenance methods

Bathtubs can be divided into acrylic bathtubs, steel bathtubs and cast iron bathtubs according to their materials. The service life of the bathtub is closely related to maintenance. The prevention and maintenance methods of different materials are also different. Next, we will introduce the maintenance methods of these bathtubs respectively.

1. Use sponge or flannel to clean the acrylic bathtub every week. Do not use coarse cloth or scouring pad. Do not use any cleaning agents containing granular objects. It is best to avoid direct sunlight Contact with hot cigarette butts. Use mild cleaning agents (such as dishwashing detergent), do not use abrasive cleaning agents. Acrylic bathtubs can also be cleaned with glass water. The cast iron bathtub should be thoroughly rinsed with clean water after each use, and wiped dry with a soft cloth. If you encounter stubborn stains, you can use a small amount of abrasive cleaning agent to clean it. Use a soft nylon brush to clean the bottom non-slip surface. Do not use steel wire balls, steel wire brushes or abrasive sponges to scrub. The jacuzzi system should be flushed more than twice a month. Adjust the nozzle clockwise to the fully closed position to prevent air leakage.

Bathtub maintenance guide

Pour warm water into the bathtub to 2 inches above the maximum nozzle, or leave the water in the bathtub after use. Add two scoops of low-foaming powdered automatic dishwashing detergent and a small amount of household bleach to the water. Turn the jacuzzi on for 5 to 10 minutes, then turn it off, drain the water, and then rinse the surface of the bathtub with water. When the bathtub is kept hot and humid for a long time, a lot of bacteria will grow. Sometimes after cleaning, the surface looks clean, but in fact there are still many bacteria. It is recommended to wipe the surface of the bathtub with boiling water on a regular basis. Do not use disinfectant water casually, because disinfectant water may not kill molds and fungi. The bathtub does not seem to be necessary for the bathroom, but everyone has the dream of taking a bath. Design and technology are advancing. The problems and doubts encountered when buying and using bathtubs in the early years have now been further resolved. Re-understand the bathtub and choose the one that suits you.

2. Gentle treatment of surface stains can use a discarded soft toothbrush dipped in bleaching powder to scrub the surface, which can remove stains and mold. If you encounter difficult stains, you can also use half a lemon dipped in salt to wipe, or you can use a soft toothbrush with whitening toothpaste to scrub. Turpentine is also very useful at this time. For scale, products used to clean toilets are very useful. If you don't like the pungent smell, you can also use lemon and white vinegar as a more natural method.

Don't use detergents with fading function, especially when the bathtub at home is colored. To deal with mold and fungal disease-causing bacteria, rinse with bleaching powder and peroxide water and wipe dry immediately. The bathtub does not seem to be necessary for the bathroom, but everyone has the dream of taking a bath. Design and technology are advancing. The problems and doubts encountered when buying and using bathtubs in the early years have now been further resolved. Re-understand the bathtub and choose the one that suits you.