Clay Di tells you what is a constant temperature shower

Clay Di tells you what a constant temperature shower is. I believe that many people have experienced the temperature of the water during bathing. So, do you know a constant temperature shower? How is it used? Take a look! ①What is a thermostatic shower? A thermostatic shower is another name for a thermostatic shower faucet, also called a thermostatic shower faucet or a thermostatic shower faucet. In the family, there are generally four places where hot and cold water mixing faucets are used: kitchen, wash basin, bathtub, and shower room. Among them, the Clay Di thermostatic shower, because the mixed warm water used for showering is directly sprayed on the human body through the shower, maintaining a constant temperature can greatly improve the safety and comfort of the shower. The thermostatic mixer equipped with a shower head is adopted. The faucet can achieve this purpose. Analysis of the function of the Clidi thermostatic shower thermostatic faucet can automatically balance the water pressure of cold water and hot water in a short time through the thermostatic adjustment valve core of the faucet, so as to maintain the stability of the outlet water temperature without manual adjustment. . The thermostatic shower faucet is suitable for shower facilities in homes, hotels, public bathrooms, and barber shops and other environments where water pressure often changes. ②How to use the thermostatic shower The standard thermostatic shower faucet has a knob on each side, and the left knob adjusts the water temperature: turn it forward, the water temperature drops; turn it backward, the water temperature rises, but turn it when it reaches 40℃ Not moving anymore. This is because when the water temperature exceeds 40℃, it is easy to burn the skin. If you need hot water with a higher water temperature, you must press and hold the red safety button on the knob before you can continue to screw it back. The knob on the right controls the water outlet mode and water volume: it is closed when the scales are aligned; screw it forward, the lower the water spout discharges water, the more you screw it forward, the greater the amount of water; the back screw, the more water is discharged from the shower, the further you screw it, the greater the amount of water . Precautions for temperature control lock at 40℃ The service life of the shower faucet; * Try to shorten the distance between the water heater and the faucet, so that the hot water can reach the faucet as soon as possible; * The normal water pressure is 0.05Mpa ~ 0.6Mpa; * The cold and hot water supply pipes must not be installed incorrectly. The hot water pipe must be on the left and the cold water pipe must be on the right; * The installation site must be cleaned before installing the thermostatic shower faucet, so as not to damage the rubber ring, thread, thermostatic valve core and other parts of the faucet by small sandstones;* Please install according to the instructions of the manual, pay special attention not to leak, lose or damage any gaskets or rubber rings; * The thermostatic shower faucet itself has no heating function, please adjust the water temperature of the water heater to 60℃ ~ 85℃; * Shower And the shower pipe cannot withstand the high temperature above 60℃; * After each use, be sure to adjust the water temperature adjustment knob on the left to below 40℃; * If the water pressure of hot water and cold water is too different, please use a screwdriver to adjust the bracket Valve. Households using gas water heaters need to pay more attention to this point. Clay Di has its own pre-filtering system thermostatic shower (