< img height="1" width="1" style="display:none;" alt="" src="https://px.ads.linkedin.com/collect/?pid=5785916&fmt=gif" />

 

Meet KingKonree(KKR) at 135th Canton Fair: Booth No: 11.1 C05-06. April 23th to 27th 2024

Different bathtub materials and different cleaning methods

by:KingKonree     2021-05-11

The types of household bathtubs and how to clean the bathtubs. There are many types of bathtubs in our family, which can generally be divided into acrylic bathtubs, steel bathtubs and cast iron bathtubs. Its service life is directly proportional to its maintenance and cleaning work.

Different bathtub materials and different cleaning methods

First of all, acrylic bathtubs should be cleaned with sponges or flannels every week. Do not use coarse cloths or scouring pads. Do not use any cleaning materials that contain granular objects. It is best to avoid direct sunlight and contact with high-temperature cigarette butts. Use mild cleaning agents (such as dishwashing detergent), do not use abrasive cleaning agents. Acrylic bathtubs can also be cleaned with glass water.

Secondly, every time the cast iron bathtub is used, it must be thoroughly rinsed with clean water and dried with a soft cloth. If you encounter stubborn stains, you can use a small amount of abrasive cleaning agent to clean it. Use a soft nylon brush to clean the bottom non-slip surface. Do not use steel wire balls, steel wire brushes or abrasive sponges to scrub. The jacuzzi system should be flushed more than twice a month. Adjust the nozzle clockwise to the fully closed position to prevent air leakage.

Bathtub cleaning tips

Tip 1: Fill the bathtub with warm water to 2 inches above the maximum nozzle, or leave the water after use In the bathtub. Add two scoops of low-foaming water to the water: powdered automatic dishwashing detergent and a small amount of household bleach. Turn the jacuzzi on for 5 to 10 minutes, then turn it off, drain the water, and then rinse the surface of the bathtub with water. When the bathtub is kept hot and humid for a long time, a lot of bacteria will grow. Sometimes after cleaning, the surface looks clean, but in fact there are still many bacteria. China Procter u0026 Gamble recommends that you wipe the surface of the bathtub with boiling water on a regular basis. Do not use disinfectant water casually, because disinfectant water may not kill mold and fungus.

Tip 2: Gentle treatment of surface stains. You can use a discarded soft toothbrush dipped in bleaching powder to scrub the surface, which can remove stains and mold. If you encounter difficult stains, you can also use half a lemon dipped in salt to wipe, or you can use a soft toothbrush with whitening toothpaste to scrub. Turpentine is also very useful at this time. For scale, products used to clean toilets are very useful. If you don't like the pungent smell, you can also use lemon and white vinegar as a more natural method. Do not use detergents with fading function, especially when the bathtub at home is colored. To deal with mold and fungal disease-causing bacteria, rinse with bleaching powder and peroxide water and wipe dry immediately.

Tip 3: Repair the scars in time. After the bathtub is installed, do not move it privately. If you need to move the position, you must contact a professional. Do not hit or hit the surface with hard objects, causing bruises or scratches. If you need to repair the dull or scratched part of the acrylic bathtub, you can use a clean cloth mixed with a colorless automatic polishing solution to wipe vigorously, and then apply a layer of colorless protective wax. Do not wax the area where your feet are left to prevent slipping.

Tip 4: Deal with pipeline blockage at any time and disinfect the pipeline on time to clean up once or twice a week, first to remove the smell, and second to prevent the growth of bacteria. : You can use a product specially designed to clean the sewer, pour it into the sewer, and clean it after 5 minutes. Be careful not to use it in a metal pipe. If the bathtub is clogged, close the drain valve first, and then put an appropriate amount of tap water in the bathtub; place the rubber suction device (for dredging the toilet) on the drain valve; while opening the drain valve, block the basin or The overflow hole of the bathtub; then quickly suck up and down to suck out the dirt or hair and clean it up in time. In the case of serious blockage, it can be repeated several times until it is cleared.

In general, bathtubs are not necessary for all family bathrooms, but everyone has the dream of enjoying a warm and healthy bath. The above experience in cleaning the bathtub is hoped to help everyone. At the same time, I also remind friends who want to buy bathtubs, they must combine the actual situation of their own layout to choose a bathtub that suits them. Life requires us to slowly taste, and we can't destroy it by ignoring some small details.

Custom message
暂无友情链接数据
Chat Online 编辑模式下无法使用
Leave Your Message inputting...