How to install and remove the faucet hose?

Among the faucet accessories, the hose of the faucet has a very important position. Today I will talk about a little knowledge about the hose of the faucet, and I hope to help when encountering some things in daily life. Installation of the faucet hose Because the faucet hose is generally connected to all the water outlets, if it is a faucet with constant temperature, hot and cold functions, you must distinguish where the hot water is and where is the cold water when installing the hose. On the other hand, if the installation is wrong, the water cannot be discharged.　　How to replace the faucet hose　　Open the faucet first to test whether the water inlet switch is closed; if the water from the faucet is large, you should close the water inlet first before proceeding to the next step.　　 Follow the steps, first unscrew the two faucet hose heads under the sink (or wash basin) from the water pipe joints on the wall.　　 Then unscrew the fixing ring used to fix the water faucet under the basin, so that the hot and cold water faucet can be taken out.　　 After the fixing ring under the basin is unscrewed, the faucet can now be lifted up.　　After taking out the faucet, first unscrew the tubular screw rod; then turn the two hot and cold water inlet hoses, one by one counterclockwise, so that the hose can be removed. When installing a new hose, first use the hose to pass through the fixing ring under the basin and the tubular screw in order, and then screw it into the faucet one by one.　　What to do if the faucet hose is broken　　Use a wrench to remove the iron part and go to the hardware store to buy one and install it.