How to install the toilet Rifeng Sanitary Ware teaches you the steps of toilet installation

How to install the toilet Rifeng Sanitary Ware teaches you how to install the toilet. The toilet installation method is something that many of us will care about. After all, the quality of home decoration is related to our future life, so we should understand how to install the toilet. Below are two common toilet installation methods. 1. Dry installation method 1. Saw the ground defecation pipe from a height of 5mm from the ground, and the saw cut should be flat. 2. Lay the toilet installation drawing flat on the ground, and put the round hole in use on the defecation pipe. Arrange the installation lines on the drawing, and use a drill to drill two installation holes with a diameter of 3/8' and a depth of 55mm according to the positions of the marked installation holes. 3. Embed the nylon wall bolt in the drilled installation hole. 4. Put the P-SEAL on the opposite side of the toilet (the floor should be padded with cardboard to prevent the glazed surface from scratching) P-SEAL on the outside of the toilet's defecation opening to make the bottom of the toilet close. 5. Align the toilet defecation opening with the ground defecation pipe, and easily put it down, correct and adjust the position of the toilet installation hole on the ground where the nylon wall bolt is embedded to make it coincide. 6. Fix the toilet with 80mm fixing screws, put on gaskets, lock in the pre-embedded nylon wall bolts, and cover the decorative cover. 7. If the toilet has no water leakage after the water test, that is, use a special bathroom caulk to fill the gap between the toilet and the ground; if there is water leakage, it means that the P-SEAL is not installed correctly, and the toilet should be removed and reinstalled. Second, glass glue fixing method 1. Pull the bolt method, put the toilet in the installation position, through the installation hole on the toilet, draw the bolt hole position on the ground, after drilling the hole, insert the bolt, and seal the toilet with glass glue bottom. 2. Glass glue bonding method, put glass glue on the annular floor of the toilet foot, wipe the toilet foot clean, and sit parallel to the installation position to make it adhere firmly. To install the toilet, we usually choose the two above, but there are other installation methods. For more sanitary ware related information, please visit the official website of Rifeng Sanitary Ware. (