Sub-station

ShIP to

Installation points of bathroom sinks Installation height of bathroom sinks

by:KingKonree     2021-04-29

  The key points of installing toilet sinks? How high is the bathroom sink installation height? The sink is an indispensable element of bathroom decoration. The sink is the area where we usually wash and wash our hands. Therefore, the installation of the sink should take into account the reasonable height and size, and avoid the installation size and height from affecting the convenience of use. Today's editor Let me introduce it to everyone.

   Bathroom sink installation size height:

   The size of the sink has the smallest control, the minimum width is 550mm, and the 600mm set bathroom on one side has reduced the sink to 300mm in order to save space Right or left, but even if you do this, it is impossible for the washbasin to be only 300mm wide. It must protrude from the washstand, which makes it inconvenient to place things. The other key is to leave a clearance of 550mm from the center of the washbasin to the walls on both sides, that is to say, there must be a clearance of 1100 to put your countertop, otherwise it is crappy to use so you can integrate everyone's opinions. In order to be more economical, some people don't even need a washbasin, so they need a floor-standing washbasin, just put a soap or something.

   But one of the more commonly used sizes is under counter basin: countertop 850mm, above counter basin: countertop 750mm, this size is the standard size for bathroom sink installation, but we can look at it according to our actual situation, If the average height of the people in the family is relatively high, then of course the design should be higher. If the average height of the family is not very high, then it is recommended to install the bathroom sink lower.

  The key points of installing the bathroom sink:

  1. Leave enough distance between the two basins, otherwise they will affect each other when used.

  2. Because of the staggered support under the countertop of the counter basin, the disassembly and assembly are complicated. If the length of the countertop is small, it is difficult to guarantee the installation quality during installation.

  3. After installation, the overall appearance of the under-counter basin is relatively clean and easy to take care of. It should be noted that the joint between the basin and the countertop is a place where dirt and dirt are easily hidden to prevent mildew.

  4. The under-counter basin has higher requirements for the installation process. First, the mounting bracket must be customized according to the size of the under-counter basin, and then the under-counter basin is installed in a predetermined position, and the bracket will be opened after fixing the bracket The countertop cover of the hole is fixed on the wall on the undercounter basin. (Usually the angle iron is used to support the countertop and then fix it with the wall.)

   Through the above introduction, you must be concerned about the installation points of the bathroom sink and the bathroom sink installation. You have a certain understanding of the heights. If you encounter similar problems in your life in the future, you can refer to these methods. I hope this article will be helpful to you.

Related reading:

  How to clean ceramic sink /p>

   Is the above counter basin better or under counter basin? Recommended bathroom sink decoration plan

Custom message
暂无友情链接数据
Chat Online 编辑模式下无法使用
Leave Your Message inputting...