Kangna Sanitary Ware teaches you how to choose a shower to enjoy the bathing life easily

Kangna Sanitary Ware teaches you how to choose a shower head, enjoy bathing and life easily. When choosing a shower head, first look at the shower head. Pay attention to whether the shower head is easy to clean. Over time, scale deposits will inevitably occur. If it cannot be cleaned, some nozzles may be blocked. In order to avoid clogging of the outlet due to poor water quality, well-designed shower nozzles often protrude out for easy cleaning, or nozzles. It is made of silica gel, and when cleaning, you can use a rag or hand to wipe off the scale deposited on the nozzle. Some showers are also equipped with the function of automatically removing scale. You can ask more about this when purchasing showers. Looking at the coating and valve core, generally speaking, the brighter and finer the surface of the shower, the better the coating process. A good valve core is made of ceramic with extremely high hardness, which is smooth and wear-resistant, preventing running and dripping. Consumers must try to twist the switch by themselves. If the hand feel is poor, it is best not to buy this kind of shower. Finally, shower accessories will directly affect the comfort of its use, so special attention should be paid. For example, whether the water pipes and lifting rods are flexible, what is the flexural resistance of the shower hose and the steel wire, whether the sprinkler joints are equipped with anti-twist ball bearings, whether there is a rotating controller on the lifting rods, etc. Sprinkler installation method The installation height of the shower can be divided into two types according to the type of shower: the surface-mounted lifter shower is generally defined by the surface of the shower, and the distance is preferably 2 meters. It should be noted that these data are only average data, and the actual installation of the shower should be adjusted according to the height of the user. The concealed water pipe of the exposed shower switch is hot on the left and cold on the right. The center spacing should be 150mm. The concealed water outlet on the wall should be level with the tile surface. The internal concealed water pipe should be perpendicular to the wall. After the shower is installed, it should be with the wall. Face at a 90 degree angle. In addition, the adjustment of the shower water pressure is also a key: under normal circumstances, the water pressure within 1.5 kg is most suitable for the use of the shower. Too much water pressure will cause the shower to burst, and the shower cannot be used normally if the water pressure is too small. Cleaning precautions 1. Do not use strong acid when removing scale to avoid corrosion on the surface of the shower. 2. Do not wipe the surface of the shower with steel balls or other hard objects to avoid scratching the surface of the faucet. 3. Do not forcibly disassemble the shower head for maintenance. Improper disassembly will damage the appearance and internal structure of the product. The common sense of the shower head has a look at the spray effect. From the outside, the shape of the shower looks similar. You must look at the spray effect when choosing. A good shower can ensure that each small spray hole sprays uniformly, and can ensure a smooth and dripping under different water pressures. The shower effect, you can test the water when choosing to see if the jet stream is even. Second, the internal design of spray showers is also different. When choosing a handheld shower, in addition to its spraying effect, the spraying method of the handheld shower can also be divided into lasing and massage. The general spraying method can bring more More ideal shower pleasure. Anhua Sanitary Ware free-use technology, the hand-held shower can choose the appropriate spray mode according to the mood: natural and comfortable rain type, energetic massage type, comfortable and warm spray type, invigorating and soft water column type, water-saving state dripping type . According to your mood, 'bath' as you like. Third, look at the quality of the surface coating. In addition to affecting the quality and service life, it also affects the usual cleaning and sanitation. The surface of the shower is generally chrome-plated. A good coating can be maintained at a high temperature of 150C° for 1 hour without blistering or foaming. Wrinkles, no cracks and peeling phenomenon; 24-hour acetic acid salt spray detection does not corrode. When choosing, you can see its gloss and smoothness. The bright and smooth shower shows that the coating is even and the quality is good. Fourth, the ceramic valve core affects the experience and service life of the shower. A good shower uses a ceramic valve core, which is smooth and frictionless. When selecting, you can turn the switch by hand, and feel comfortable and smooth to ensure that the product maintains smooth and reliable performance during use.