Meilong Sanitary Ware teaches you to choose a squatting pan

Meilong Sanitary Ware teaches you to choose a squatting pan. This sanitary product is now not only common in public areas, but also beginning to be popular in the bathroom at home. The advantage of the squatting pan over the toilet is that it does not occupy the space of the bathroom and is more convenient to clean. If you want to install a squatting pan in the bathroom, you must know how to choose a squatting pan. If the squatting toilet is used at home, you must choose a trap that has a trap, and use the trap to turn it. This will create a 'water seal' to prevent the odor of the sewer from flowing back. Without the water bend, it is not easy to block and easy to taste off. There are two types of squatting pans: covered and uncovered. A covered squatting pan will protrude. Personal advice is not good. Now there is an uncovered but with a cover, which I personally think is suitable for family use. The pit flushing method is different. There are pedals, manual ones, water tank ones, and sensor ones. The pedal type is commonly used in general engineering. The foot-operated type is directly connected to the tap water pipeline. If the tap water pressure is not enough, the water output is small and it is difficult to clean it. (You must have experienced the experience that the poop is so thick that it can't be cleaned). I personally feel that it is best to have a small water tank, so that after each defecation, the water flushed under the water tank forms an instantaneously larger high-pressure water flow, which can be flushed more cleanly. And the drain before the water is discharged. It should be selected according to the pipeline design and usage habits. Choose high-temperature glazed, high-density, low water absorption, easy to clean. After decades of use, it will not yellow or change color, will not smell, and the flushing effect will be good, and the water will be silent. Toilet installation and precautions: 1. Prepare before installation. Before installation, you need to reserve a squat toilet under the ground. The depth of the squatting toilet is greater than the height of the toilet. At the same time, prepare the tools needed for installation, mainly tape measure, tape, Glue etc. 2. Connect the water inlet pipe and insert the connecting rubber plug into the water inlet hole of the toilet squat toilet. It is best to apply a layer of glass glue or mortar on the outer edge of the toilet that contacts the water inlet hole, and insert the water inlet pipe into the glue. Tuck it into the water hole to make it well sealed with the rubber plug to prevent water leakage. 3. The water outlet is stitched and placed on the edge of the water outlet of the squatting toilet, coated with a layer of glass glue or putty, inserted into the inlet of the sewer pipe and screwed together, and the toilet is erected horizontally with coke residue or other fillings. 4. Check whether there is water leakage. Open the water inlet system and check whether there is water leakage at each joint. If there is water leakage, check the conditions of each joint. Until the problem is solved. 5. After filling and laying bricks to check that there is no water leakage at the joints, fill the squatting toilet with fillers, and fill the contact surface of ceramic and cement mortar with more than 1cm of asphalt or linoleum and other elastic materials. Then use cement mortar to fix the toilet squat toilet in the horizontal plane. After it is stable and stable, then pave the toilet floor tiles on the cement surface. 6. Do not test the water right away. After the squat toilet is installed, do not test the water immediately, otherwise the installation effect may be affected by mixing with cement. Test the water after the cement mortar is dry, and it can be used if there is no abnormality. (