< img height="1" width="1" style="display:none;" alt="" src="https://px.ads.linkedin.com/collect/?pid=5785916&fmt=gif" />

KingKonree - Solid Surface Manufacturer of Sanitary Ware, Solid Surface Countertops & Sheets for over 24 years, innovation in moulding and thermoforming


placing tiles around an undermount kitchen sink

by:KingKonree     2020-10-17
The ground floor kitchen sink is a common place in most houses and can have a wide variety of shapes and sizes.
They have a unique feature with the standard kitchen sink, as the edge of the bottom sink is leveled by the counter to maintain a flat and smooth surface.
To add a little elegance to your unermount sink, placing waterproof tiles on top of the sink and bench will bring more style to the sink and complement the surroundings around the sink.
The article will touch on how to effortlessly place the tiles around your base, which is really a very simple job, and the finished look will envy your visitors.
Your first step is to measure and shape the tiles around the edge of the sink and you can get the tiles in advance
Cut and measure by a merchant, or simply do it yourself.
To do this, you need to measure your tiles before the sink is placed on the countertop so that the bench becomes sacred and only shows the shape of the sink placement.
Grab one of your square tiles and place it in the corner or edge where the sink is going so that it will overlap a little bit and use the level to make sure it\'s straight.
Now Mark the shape of the tile from below with a permanent mark so it should have a semi-curved shape.
Do this for all four corners before you mark out four tiles.
Once you do this, don\'t cut the tiles into the right shape with a wet saw.
Make sure the tiles are straight and true as you will use them as a marker to put the rest of the tiles down.
OK, the next step is to put your four tiles down permanently with a strong adhesive, glue your tiles firmly on the countertop, if your tiles are paved straight, then you only need to put the tiles down at once until they meet in every corner and put them in the middle where they meet.
If you find that the last point is too small for the last tile when you get to the middle, then just cut, no matter how big or small it is, it should be a square cut. Don\'t worry too much about overlapping at the top edge of the counter as this ca is easy to cut as long as everything is straight in the first place.
Other ways can be found on the Internet to place tiles around the kitchen sink on the ground floor, which is just one of them.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...