Supor Sanitary Ware|What should I do if the faucet leaks? Three ways to teach you to get it done!

Supor Sanitary Ware|What should I do if the faucet leaks? Three ways to teach you to get it done! Due to the long service life and improper use of the faucet at home, there will be water leakage and blockage, which makes many families feel distressed. Watching the water keep dripping is really heartbreaking, and it also caused a waste of water resources. Repairs can't be in place in time, and it will cost a lot of money to repurchase! In fact, if it is not a major problem, you don’t need to buy a new faucet to replace it, and you don’t need to spend money to ask someone to fix it. Some common minor problems can be fixed quickly by themselves! Let's take a common kitchen faucet as an example to introduce some solutions to the problems of daily faucets: Prepare tools: adjustable wrench, flat (cross) screwdriver, Allen wrench, rubber gloves, valve core, white vinegar. If you repair it yourself, the first thing is to turn off the water supply. Just turn off a water supply angle valve near the faucet to turn off the water supply, but if the house is not equipped with a water supply angle valve for every faucet, you have to turn off the main water supply switch to shut off all water supply. Next, we need to find the cause and prescribe the right medicine. The main daily problems of the faucet are summarized as the following three: the faucet has a water fork or the water volume is low. Possible reasons: aerator fouling, debris, scale and other dirt clogging. Solution: Remove the bubbler and clean the bubbler. If there is a lot of scale accumulation and the water cannot be cleaned, you can soak it in white vinegar and then clean it. Aerator disassembly diagram: Water leakage at the junction of the faucet outlet arm and the main body. Possible reasons: missing O-rings and broken O-rings Solutions: 1. Remove the screws on the side of the main body; 2. Pull out the water arm; 3. Will be damaged Replace the O-ring; 4. Insert the water outlet arm back into the main body; 5. Tighten the screw on the side of the main body; disassembly diagram: water leakage at the faucet handle, water leakage at the outlet, water leakage at the faucet handle, for the following reasons: the pressure mother is not installed Tight, damaged valve core, valve core sealing ring problem. Water leakage at the outlet of the faucet can be caused by the following reasons: The valve core is faulty. Treatment of water leakage at the handle: 1. The press nut is not tightened: Take off the handle, remove the press nut cover, and use a wrench to lock the press nut clockwise. 2. The valve core is damaged: remove the handle, then remove the gland cap, then use a wrench to remove the clamp nut, and finally take out the valve core and replace it, and then install the clamp nut. 3. Valve core sealing ring problem: remove the valve core, check whether the sealing ring at the bottom of the valve core exists, whether it is damaged, whether there are impurities; if there is no sealing ring, install the sealing ring, if it is damaged, replace the sealing ring. If there are impurities, just clean up the impurities. Water outlet leakage treatment method: 1. Close the angle valve and remove the handle of the faucet. 2. Unscrew the gland cover (decorative cover). 3. Use an adjustable wrench to unscrew the press nut and take out the valve core for replacement. 4. Put back the fittings such as the pressing nut and pressing nut cover, and then you can use it. Disassembly diagram: three simple tricks, have you learned it? (