Sub-station

ShIP to

Talking about the antifreeze tips of sanitary ware products in winter

by:KingKonree     2021-07-20
Talking about the antifreeze tips of sanitary ware products in winter


Release time: 2021-01-22 11:33:31; Update time: 2021/01/22 11:38:30; Article source:; Views: 473
   I believe that many people have watched videos of faucet freezing, especially in the northern regions, where faucets and water pipes are often frozen, and every year’s interesting news has these faucets freezing. In fact, what I want to say is that when the cold wave hits, in addition to keeping warm and adding clothes, the sanitary ware at home should also be frost-proof! Because when the water is lower than -4 degrees Celsius, the volume of ice will expand, which will easily cause the water in the sanitary ware product to expand due to freezing and crack the product. So how to prevent freezing of sanitary ware products? The following bathroom editor will give you a small coup for antifreeze sanitary ware!  1. Precautions for faucet frost crack prevention:    (1) Causes of faucet freezing and cracking:   Using environment below 0℃, including but not limited to the following reasons:   1.  2. The faucet is installed outdoors, the water inlet valve is not closed, and the antifreeze protection is not done.   3. The owner is out for vacation or does not live for a long time, the room is not heated, and the water inlet valve is not closed to drain the remaining water from the tap. After the owner renovated the room, the room was ventilated, and the windows were not closed at night, and the water inlet valve was not closed to drain the remaining water from the tap. (2) How to preventive measures:    the use environment below 0℃, including but not limited to the following preventive measures:    1. If the temperature of the faucet installation environment on the project site is lower than 0℃, it is recommended not to install the faucet temporarily or to install temporarily without water or water After testing the water, drain the water in the pipeline thoroughly.  2. At night, the windows of the kitchen, bathroom and shaded rooms should be closed to ensure that the indoor temperature is above 0°C.  3. For rooms where the indoor temperature is lower than 0°C, close the indoor water meter valve and let the excess water out.  4. For rooms where the indoor temperature is lower than 0°C, the heating must be turned on to keep the temperature above 0°C.   5. You can use cotton and linen fabrics, old cotton clothes, cotton wool and other thermal insulation materials to thicken the faucet.   2. Precautions for anti-freeze cracking of the toilet    In winter, the bathroom doors and windows are temporarily closed to stop ventilation and keep the indoor temperature. To prevent freezing, please drain the remaining water when the toilet is not in use.  The method and steps are as follows: close the water inlet valve, loosen it and remove the drain bolt, and tighten the drain bolt after the remaining water is exhausted, otherwise it will cause water leakage.   There will be water in the toilet bowl. Sponge cloth and water pump can be used to suck out the water to prevent the toilet from freezing and cracking for a long time.   In addition, you can pour antifreeze into the water tank, or add alcohol or salt to the water, which can reduce the freezing point of the water and effectively prevent freezing. If the heating system is turned on in the toilet and it can be ensured that the toilet will not freeze, there is no need to add antifreeze to the toilet. 3. Precautions for maintenance of the sink immediately wipe it with a dry rag after use to avoid surface icing and cracking; do not use steel sanitary ware to avoid scratching the surface of the sink when cleaning; you can choose to use the sink when the indoor temperature is too low Cover-layer cloth to keep it warm to avoid cracking due to low temperature. Fourth, the bathtub maintenance precautions First of all, keep the bathtub dry after each use of the bathtub to avoid long-term water seepage and cause deformation or the surface layer to fall off and become unusable; do not use strong acid and alkali cleaners when cleaning to avoid corrosion of the bathtub surface; use Wipe with a soft cloth to avoid scratches. If there is a slight scratch accidentally, sand it immediately to restore a smooth surface; do not place metal objects on the surface of the bathtub to prevent the bathtub from rusting or surface damage, which will affect its beauty and practicality .   5. Precautions for the maintenance of bathroom cabinet    After washing the bathroom, the surface of the bathroom cabinet should be wiped clean in time. Some cleaning products such as soap, facial cleanser, shampoo, etc. are often placed on the bathroom cabinet. If they accidentally flow out, it is best to clean them up immediately. Heavier items should be placed on the bottom of the bathroom cabinet. When cleaning the bathroom cabinet, do not scrub with metal wire, scouring pad, strong chemicals, or rinse with water to avoid corrosion. Properly use neutral detergents and other professional products for maintenance.   The above are a few key antifreeze tips for sanitary ware products. I hope it can help you in the cold winter. If you want to know more about sanitary products, please come to consult.




Previous post: How to choose a suitable bathroom washbasin
Next: Bathroom manufacturers teach you how to choose a faucet【Collection】
Custom message
暂无友情链接数据
Chat Online 编辑模式下无法使用
Leave Your Message inputting...