The bathroom is too small to install a shower room. How to separate wet and dry?

The bathroom is too small to install a shower room. How to do the separation of wet and dry? The separation of wet and dry is a must in the bathroom decoration. Generally, the shower room glass partition is used, and the simple shower curtain is used as the division of the dry and wet areas. However, because the size of the bathroom in each family is different, the suitable way is different. So which dry and wet separation methods are suitable for the small apartment bathroom? 01. The function of the shower room partition. Many people are doing bathroom decoration. I will choose to install a semicircular shower room. This kind of shower room is more closed than the shower partition. Poor ventilation will breed bacteria. It will also feel very depressing to take a bath in it, especially for the apartment with a relatively small bathroom. The shower is more crowded. The partition installation is also simpler than the shower room installation, and it looks clean and atmospheric. Therefore, in-line glass partitions are generally chosen for a simple wet and dry separation. 02. What glass partition should pay attention to is the clean and bright glass partition, which is suitable for various decoration styles. If the bathroom is not very large, you can choose tempered glass. If the partition with a larger space has a large bearing capacity, you can choose laminated glass. The glass in the shower room is best to be frosted to protect privacy. The bathroom of a family will not be affected, and the more advanced ones can automatically change color and switch automatically. When a person turns around, the glass will automatically change color and become a fuzzy effect. Finally, there is a safety issue. The selected glass must be qualified. If it is not qualified, there will be a risk of bursting. Generally, when the toughened glass is selected, it will become granular when it is broken, and it will not cause too much damage. 03. Shower glass partition frame material The shower room partition frame material is generally divided into two types, one is stainless steel and the other is aluminum alloy. I personally prefer stainless steel. Choose stainless steel as much as possible to choose black matte, because it is not easy to leave fingerprints. The black shower partition is a popular one. The sealant strip is also black in order to match the color as a whole. Compared with the traditional transparent white adhesive tape, this black sealant tape is more resistant to dirt and stains, and will not turn yellow or hard over time. 04. How to choose shower glass partition. The most important thing for shower partition is glass. We have to choose this kind of ccc label, which is generally called 3C certification. We should choose this kind of tempered glass, and this glass should be angled around to prevent wear and tear Everyone knows that this kind of glass is the most fragile point, that is, it is not easy to burst when it is done at the four corners. There is also a choice of hardware. Good hardware is especially smooth with a slight push and pull, but it is difficult to push and pull even if it is not good. In addition, the pulley must be closed well, and water cannot easily enter, so as to ensure the smoothness of the pulley. The adhesive strip is also very important, otherwise the cracks will seep water. 05. Other ways of separating the toilet from wet and dry glass partitions have many advantages, but they also have disadvantages. Since most of the partitions are made of glass, the cleaning of the glass is also troublesome. Occupies space, especially for small-sized bathrooms. If the bathroom is relatively small, you can choose to make a simple partition, you can make a half wall of brick, which can solve the separation of dry and wet and is very beautiful!