There is a lingering fragrance in the hand of the gift, and the massage bathtub is well treated

　　 Drink water without forgetting the digger, sharpening the knife without accidentally cutting wood. While enjoying a comfortable bath, preparation beforehand is essential, and the finishing touches afterwards cannot be ignored either. While people are paying more and more attention to the quality of life, maintaining a high quality of life is also a major focus. Jin Bai Liya specially brings you some tips for cleaning and maintaining the jacuzzi. It's as simple as keeping a high profile for a long time!

　　 1. If there are scratches on the surface of the bathtub, just polish it with No. 2000 water scrubbing paper, then apply toothpaste, and polish it with a soft cloth to make it as smooth as new.

　　2. The scale on the surface of the bathtub can be wiped with a soft cloth after warming it with a mildly acidic detergent, such as lemon juice and vinegar.

　　3. When the hydraulic friction device is cleaning, you can fill the bathtub with hot water at 40 degrees Celsius, add detergent per liter of 2 grams, start the hydromassage for about 5 minutes, stop the pump to drain, then fill up with cold water, and start the hydromassage for about 3 minutes , And clean the bathtub after stopping the pump to drain water.

　　4. The surface of the cylinder body is dirty and can be wiped with a wet towel. This process can be repeated three times, and it will be as clean as new.

　　 5. Do not use cleaning tools with rough surfaces, cleaning agents containing chemical solvents or particles to clean the surface of the cylinder.

　　 6. Do not use hard objects or blades to hit the surface of the bathtub, and at the same time, do not allow cigarette butts or heat sources higher than 70 shots to touch the surface of the bathtub.

　　7. After using the bathtub, drain the water and disconnect the power supply.

　　 8. If the water return and nozzle are blocked by hair and other sundries, they can be unscrewed and cleaned.

　　9. Gold-plated and chrome-plated parts do not need to be wiped frequently.