What are the common sense of bathroom shower room maintenance? Yamena Sanitary Ware tells you

What are the common sense of bathroom shower room maintenance? Yamena Sanitary Ware tells you that the shower room is a bathroom shower equipment that is composed of a shower room body and a shower base. It can mainly prevent splashing, separate the bathroom from dry and wet, and provide a certain degree of moisturizing. The shower room is currently a fashionable shower equipment on the market. Compared with the bathtub, it has good decoration and convenience. Families have higher and higher requirements for sanitary facilities. Many families hope to have a separate bathing space. However, due to the limited sanitary space in the room, the bathing facilities and sanitary ware can only be placed in the same room. The shower room makes full use of the corner of the room and uses a fence. The shower area is clearly divided to form a relatively independent bathing space. The correct maintenance method of the shower room 1. For the shower room floor, do not hit or hit the surface with sharp objects to avoid damage. 2. For the push-pull shower room, pay attention to the maintenance of the pulley. Avoid forcefully hitting the movable door from the front, and regularly clean the pulleys, slide rails, and sliding blocks, and add lubricant on time. 3. For aluminum alloy door frames, if stains appear on the aluminum surface, you can use a neutral detergent to dissolve in water and wipe it. 4. In order to avoid scratching the glass and affecting the visual appearance of the shower room, use a soft dry cloth for daily cleaning. 01. Maintenance of hardware accessories Push-pull shower door, currently there are two ways of sliding block and sliding wheel. When using the pulleys and sliders, attention should be paid to avoiding the impact of the sliding door from below, so as not to cause the sliding door to fall off; pay attention to regularly clean the sliding rails, pulleys, and sliders, and add lubricant (lubricating oil or lubricating wax); Adjust the screw to ensure the effective load and good sliding of the sliding door on the sliding door. 02. The maintenance of the aluminum alloy frame must first prevent direct sunlight and exposure, otherwise it will cause the spray layer to fade; secondly, it cannot be wiped with corrosive liquids or materials; thirdly, it is not allowed to wipe the surface with rough materials (including toothpaste); Fourth, sharp objects cannot be used to describe the surface. If stains appear on the surface of the aluminum material, use a neutral wash to clean it with water and wipe it off. 03. Do not use sharp objects to hit or hit the acrylic surface to avoid damage; do not wipe the acrylic surface with corrosive liquids to avoid damage to the surface gloss; do not wipe the acrylic surface with rough materials to avoid scratches; When cleaning the four walls and bottom basin of the shower room, a soft dry cloth should be used. If there is slight dirt, please clean it with a soft cloth or sponge dipped in a neutral detergent. When removing stubborn dirt, please remove it with alcohol. (