What are the installation methods of bathroom cabinets?

Bathroom cabinets are an indispensable product in our home life. After purchasing the bathroom cabinet, you need to perform an installation procedure, and then you can actually start using it after the installation. So, what are the ways to install bathroom cabinets? Floor-standing bathroom cabinet installation method Place the cabinet body of the floor-standing bathroom cabinet horizontally, screw the cabinet foot assembly to the fixing piece through the double-ended screw, and then lay the cabinet flat and place it in an appropriate position. The cabinet foot should be placed on the outside as far as possible to make the cabinet body Balanced force. And adjust to the level by the anchor screw. Check whether the four feet are stable when placed. If they are not on the same horizontal line, the cabinet body will be unevenly stressed and the lines will be distorted, which will not only affect the appearance but also affect the service life.　　Wall-mounted bathroom cabinet installation method　　The wall to be installed must be a solid core or load-bearing wall. Then punch holes according to the selected hole position, pay attention to the distance between the countertop and the ground is about 83 cm, and then put the plugs in the accessories into the holes, and then lock the cabinet and the wall. After the cabinet is installed, install it again. The countertop basin is aligned with the wooden sack of the cabinet, adjusted and leveled.　　The side cabinet and shelf installation method　　 need to be installed in the solid core wall. When installing according to the hole position, the cabinet must be locked, and then the overall plane must be adjusted so that there is no tilt.　　Bath mirror installation method　　It is best to choose the height of the mirror according to the height of the family, and it is most suitable to stand in the middle of the mirror. After selecting the height, punch holes in the wall to install the wall plug according to the installation specifications, and screw the wall plug to a suitable depth. According to the specific position of the hole at the back of the purchased bath mirror, fit it into the self-tapping screw on the wall, so that the bath mirror is installed.