What is the height of the bathroom sink in general
Only a clear understanding of the height of the bathroom sink can make us feel convenient and comfortable when using it in our daily life. Let’s look at some specific data below.
The height of the bathroom sink installation size
The size of the sink has the smallest control, the minimum width is 550mm, one side In order to save space in the 600mm integrated bathroom, the sink has been reduced to about 300mm, but even if this is done, the wash basin cannot be as wide as 300mm. It must protrude the sink, which makes it inconvenient to place things. The other key is to leave a clearance of 550mm from the center of the washbasin to the walls on both sides, that is to say, there must be a clearance of 1100 to put your countertop, otherwise it is crappy to use, so you can integrate everyone's opinions. In order to be more economical, some people don’t even need a washbasin, so they need a floor-standing washbasin, just put a soap or something.
However, one of the more commonly used sizes is undercounter basin: countertop 850mm, above counter basin: countertop 750mm, this size is the standard size for bathroom sink installation, but we can look at it according to our actual situation, If the average height of the people in the family is relatively high, of course, the design should be higher. If the average height of the family is not very high, then it is recommended to install the bathroom sink lower.
Precautions for the installation of bathroom sinks
1. Leave enough distance between the two basins, otherwise Will affect each other when used.
2. Due to the staggered support of the countertop of the countertop basin, the disassembly and assembly are complicated. If the length of the countertop is small, it is difficult to ensure the installation quality during installation.
3. After the installation of the undercounter basin, the overall appearance is relatively clean and easy to take care of. It should be noted that the joint between the basin and the countertop is a place where dirt and dirt are easily hidden to prevent mildew.
4. The under-counter basin has higher requirements for the installation process. First, the mounting bracket should be customized according to the size of the under-counter basin, and then the under-counter basin should be installed in the predetermined position. After the bracket is fixed, it will be opened. The countertop cover of the hole is fixed on the wall on the undercounter basin. (Usually an angle iron is used to support the countertop and then fix it with the wall.)
Cleaning the bathroom sink
Get ready first Cleaning tools such as rags, detergents, and small brushes. Since the stopper ring of the sink on the surface of the wash basin is the easiest place to hide garbage, if there is garbage, use a clip to clamp the garbage first; then clean the surface of the wash basin, wring it out with a rag and detergent, and wipe it finely; The plug ring of the drain can't be wiped with a rag. At this time, a small brush and detergent can be used. After cleaning, please use a dry cloth to wipe clean water stains on the surface.
I believe that after reading the above content, you should have an understanding of the installation height of the bathroom sink and the precautions for the installation of the sink. I hope to be able to do a good job of the sink. Installation precautions are helpful.