Why isn’t the shower room capped? The shower room tells you the secret

Why is the shower room not capped? The shower room tells you this secret that someone who installs a shower room at home will generally find that the shower rooms currently on the market are not designed to be capped, whether they are flat, diamond, or arc shower rooms. Why is it designed like this? Wouldn’t it be better to keep warm with a capped design? First of all, the shower room is a completely sealed space, and the water vapor generated during the shower cannot be dissipated, and it is easy to form a “high-concentration steam” shower space. Being in such an environment for a long time will cause adverse reactions such as chest tightness and shortness of breath. The non-capped design allows the water vapor to dissipate slowly instead of completely gathering. This will not only ensure that the warm water in the shower room leaks out, so that the heat will not be quickly lost, but also ensure good ventilation, and avoid dizziness and difficulty breathing due to long bathing time, high temperature and humidity. Secondly, the design of the cap not only affects the aesthetics, but also increases the total price. Because of the fully enclosed design, exhaust equipment must be installed to maintain air ventilation and convection. But this will inevitably affect the overall visual effect of the shower room. Finally, the important function of the shower room is to realize the partition of the bathroom. Generally speaking, the height of the shower room is 1.85 meters, which can basically realize the partition, and there is no need to do the topping treatment. So, how do we choose a high-quality and easy-to-use shower room? Shower room manufacturers teach you 6 simple steps to quickly choose a shower room. 1. Determine the room type and customize the size. At present, the shower room types on the market include arc, fan, square, diamond, U, and linear, etc. You can choose the appropriate room type according to the layout of the bathroom at home. After setting the room type, choose the opening method of the shower room according to your own usage habits, including left opening, right opening, symmetrical opening, internal and external opening, etc. The next step is to ask the master to come to the door to measure the size and make precise customization. 2. Looking at the glass, note that explosion-proof glass is the core component of the shower room, and what we should pay attention to is the safety of the glass. 1. Check whether the glass is transparent, whether there are defects such as dots, bubbles, etc. 2. See if there is 3c mark certification on the original glass. 3. Look at the model of fully tempered glass fragments. At present, almost all shower rooms on the market use automotive-grade tempered glass. Tempered glass belongs to safety glass, which has stronger resistance to wind pressure, cold and heat, and impact. When the glass is damaged by external force, the fragments will become small particles with obtuse angles similar to honeycombs, which are not easy to cause harm to the human body. Therefore, it is recommended to choose tempered glass with a moderate thickness and an explosion-proof film. 3. Look at the hardness of aluminum. To be durable, shower room aluminum often needs to support the weight of tens of kilograms or even hundreds of kilograms of glass. If the hardness and thickness are not good, the shower service life will be very short. The hardness and thickness of all aluminum materials are Important assessment indicators. The thickness of the qualified aluminum material in the shower room is above 1.2mm, and the aluminum material for hanging glass on the rail must be above 1.5mm. 4. Look at the material of the pulley and the sealing of the wheel seat. First of all, the wheel seat of the pulley should be made of compression-resistant and heavy-duty materials, such as 304 stainless steel and high-end synthetic materials. The seal of the wheel seat is good, water vapor is not easy to enter the wheel, and the smoothness of the wheel is guaranteed. Secondly, the pulley and the track should be closely matched and the gap should be small. The ball bearing of the door must be flexible and easy to open and close. The screws are made of stainless steel. All hardware must be round and smooth. Scratching inside is not fun. 5. Look at the collocation and choose practical products to create a more comfortable shower space. You can add showers, floor drains, corner baskets, clothes hooks and other accessories. 6. See whether the product design is humanized boutique racks, sealed magnetic strips, and cushioning devices. These humanizations can provide you with a more comfortable and intimate bathing experience. (