Yamena Sanitary Ware The correct use and maintenance of sanitary ware

Yamena Sanitary Ware The correct use and maintenance of sanitary ware. The bathroom is originally the place of reincarnation of grains, and it is also a place for cleaning, so it is easy to be soiled. If it is not maintained, the service life of these sanitary wares will be shortened. So how should sanitary ware be maintained? Below we give the correct use and maintenance methods of sanitary ware, hope it will be helpful to everyone. How to use the sanitary ware? When using any kind of faucet products, there is no need to use excessive force when opening and closing, just gently twist or toggle. Products equipped with hoses should be carefully so that the hoses are often connected to the natural spreading state, so as not to break. The metal hose of the bathtub faucet should be connected to the natural spreading state, and it should not be coiled on the faucet when necessary. At the same time, when it is used or not, the discussion place between the careful hose and the valve body should not form a dead angle, so as to avoid breaking or damaging the hose. It is caused by the incomplete closure of the spiral steady-lift rubber faucet. Usually, it is because the harder debris is stuck in the sealing port. When you just need to remove the handle, unscrew the valve cover and the valve core to remove the impurities and install it as it is. Restore normal use. If the sealing faucet of the ceramic disc valve core is not completely closed, the sealing surface may be scratched by hard debris or the pre-tightening force applied to the valve core is insufficient. In case of leakage in the adjoining part of the faucet, it is usually caused by not tightening the part when the device is installed, just tighten it. If the amount of dripping water is commensurate with the remaining water in the spout after the water source is closed, it is a normal sign. Sanitary ware maintenance method The ceramic tile should be anti-seepage and anti-mold. The walls of the bathroom are generally decorated with some prominent colors or white ceramic tiles. If you want to keep it clean and beautiful, users can use a multi-functional decontamination cream to clean it. A toothbrush is needed for places such as tile gaps, and then it is best to brush water repellent on the tile gaps. The advantage of this is to prevent water seepage and mold growth, making the entire bathroom cleaner. How to clean the glass. Smooth mirrors and windows will be covered with watermarks due to long-term close contact with water, and such mirrors or glass surfaces will become blurred. At this time, the user can spray an X on a whole piece of glass with a spray-type glass cleaner, then dip the rag in water, wring it out, and wipe it around after folding it. Then wait for a while, and wipe it again with a dry cloth when the glass is almost dry. Or you can use the most common cleaning weapon when we were young, the old newspaper. The old newspaper has ink on it, which can make the glass as bright as ever, and also remove stubborn stains that are more difficult to clean. How to scrub the faucet faucet We use bath products when we take a bath. Commonly used sanitary ware accessories such as faucets and showers are often stained with various shower gels, shampoos, and detergents. Because the ingredients in it will react with the chrome-plated surface of the faucet, we often find that the faucet that has been used for a long time will become dirty, and it is not shiny and unsightly. At this time, we can apply a neutral detergent on a soft cloth, and then gently wipe the faucet, but this kind of work needs to be persistent, once a week. Don't 'torture' the faucet with acidic cleaners or abrasive steel wires, as that will make the faucet 'broken.' Whitening masks for toilets and squatting pans. Toilets and squatting pans are very easy to get dirty. After a period of use, some dirt will inevitably appear. If it is not cleaned and maintained, it is not only very ugly, but also affects people's health. At this time, you can put an appropriate amount of water in the toilet first, and use the toilet brush to clean it. Then pour about 5-10 ml of detergent or hydrochloric acid solution, spread it evenly on the toilet bowl with a brush made of anti-corrosion material, and then scrub it. If the dirt is heavy, remember to leave the above-mentioned cleaning agent on the surface of the toilet for a period of time before scrubbing, and then rinse it off with water. (