Zhongtao Sanitary Ware Is the toilet always flushed after using the toilet? what is the reason?

Zhongtao Sanitary Ware Is the toilet always flushed after using the toilet? what is the reason? What is the most annoying thing in life? It is estimated that many people will choose the toilet flushing is not clean, time-consuming and laborious. Why do you always have to rush several times? What is the reason that the toilet is always not flushed cleanly? 1) The toilet is clogged 2) The power of the toilet is not enough 3) Reasons for the toilet clogging 1. The quality of the glaze is low, and the toilet is easy to get dirty and clogged. The bathroom is a ceramic product, and the quality of the ceramic outside the glaze is very important. The glazed toilet is smooth, detailed and flawless. After repeated washing, it can be as smooth as new. If the quality of the glaze is not good, it is easy to cause dirt to hang on the walls of the pipe. The quality of the toilet is very important. Don't buy a toilet that is too cheap! 2. The entire pipeline is not glazed, easy to scale, block, and easy to leak. In order to save costs, many toilet manufacturers are working hard in the toilet. Some backwater bends are not glaze, and some use gaskets with low elasticity and poor sealing performance. This kind of toilet is not only prone to scaling and clogging, but also prone to leaking water. Therefore, when buying, you should reach into the dirty mouth of the toilet with your hand to see if it is smooth to the touch. Smooth hands are smooth, rough hands are not smooth. The gasket is made of rubber or foam plastic, with great elasticity and good sealing performance. It is important to buy a toilet brand. Choose a toilet made by a regular manufacturer. Never buy fake toilets! 3. The pipeline is small, and it is not easy to wash away dirt and cause blockage. The most direct way to block the toilet is his pipeline design, because it is a tortuous design. In order to drain the dirt, it is necessary to design a reasonable large-diameter pipeline and arrange a uniform and reasonable flushing hole to ensure that there is no dead corner during flushing and the flushing power is stronger. Improper internal design will result in insufficient flushing capacity of sanitary ware, greatly reducing the disposable flushing rate, and repeated flushing is necessary, resulting in waste. It is very important to buy a reasonable toilet design. Don't buy a toilet that is too cheap! 4. Incorrect installation of the toilet, causing blockage can generally be divided into two parts: the bottom outlet is not aligned with the lower outlet, the screw hole at the bottom of the toilet is completely sealed, causing the toilet water to block, the toilet tank water level is not high, and the flushing effect is affected. , So pay special attention to the installation of the toilet. Brand sanitary ware sellers have relatively reliable and comprehensive after-sales service. Buyers can enjoy free installation and 3 to 5 years warranty. During this period, the manufacturer is responsible for free maintenance and replacement. Even after the warranty period, only replacement fees will be charged. However, many toilets purchased online do not have a warranty period, and the installation is not formal, and the physical store has a formal service, the installation is correct, and after-sales problems are also on call. (