Zunlong Sanitary Ware | The meaning of the two large and small buttons on the toilet, many people don’t know

Zunlong Sanitary Ware|The meaning of the two large and small buttons on the toilet Many people don't know that the bathroom can be said to be a place where the unit surface and the cost of the home decoration are relatively high. Although there are only a few square meters, there are many configurations: toilets, bathroom cabinets, faucets, squatting pans, etc.... And the choice of sanitary ware is related to the later daily use, so everyone still pays more attention. Everyone uses the toilet every day. It is not difficult to find the two buttons on the toilet. I believe that many people don’t know the difference between the two buttons above, and press it when flushing, or press it again if it is not fully charged. In fact, there is a difference between the two buttons. Let us first understand the structure of the water tank inside this toilet. The flush tank of the toilet generally has an inlet pipe, a drain pipe, a float and a seepage pipe, a water plug, and two flush buttons on the surface of the water tank. These parts together form a complete drainage system, and these parts are indispensable. Only these parts together with the drainage system can operate normally. Every time you want to flush after the convenience is complete, just press the flush button among the two buttons, and then it will naturally drive the water release button. After pressing the button, the flush tank will release water. After the water drops to a certain position, there will be a water plug that plugs the water outlet, and the floating ball will fall. After that, the flush tank will start to store water again, and the float will rise with the water level. When the water in the tank is full again, we can flush again. Having said that, I believe that everyone has not understood the meaning of the two buttons: 1. The meaning of the size button button From the inside of the water tank below, it is known that the toilet tank has two buttons. You think these two buttons are for good-looking settings, but they are Design to help you save water. These two buttons, one large and one small, respectively represent the function of full water and half water drain. The small button is in a half-water state, when it is pressed, only half or one-third of the water in the water tank will be discharged. The big button is full of water. When it is pressed, it can release all the water stored in the water tank at one time. With greater water power, the flushing will be cleaner. Generally speaking, you only need to press one of the two buttons, but recently there is also a type of toilet. Press two buttons at the same time, it has a greater displacement and a stronger momentum, and the cleaner will be flushed. When flushing the toilet, decide how you press the button based on your actual situation. If you are urinating, you only need to press one button instead of flushing too much water. If you can choose a large button or press both at the same time when you have a bowel movement, you can flush more cleanly! 2. How to save water? Usually, many families do not need so much water when flushing, especially when urinating when. But the amount of water stored in the water tank is fixed, how can it be adjusted? As long as a bottle of water is required. Prepare a large bottle filled with water, open the water tank, and put the bottle in it. Put on the water cover and you're done. The principle is: the water bottle can occupy a large part of the volume of the water tank, which is equivalent to saving a bottle of water every time you flush, thereby reducing the amount of stored water and achieving the purpose of water saving. (