KingKonree - Solid Surface Manufacturer of Sanitary Ware, Solid Surface Countertops & Sheets for over 25 years, innovation in moulding and thermoforming
DIY advice on how to clear a blocked drain
To clear a blocked drain, plungers are a great tool if you used correctly. A plunger should be the first tool you use when a blockage is seen. When you are attempting to unblock a bathtub or bathroom sink drain, you should get the best results if you remove the stopper mechanism from the drain inlet. To do this, find the control rod attached to the drainpipe below the sink. Firstly, you will need to take care in removing the rod - it's usually secured by spring clip. The rod goes between your stopper stem similar a thread through a needle. Pull the stopper all the way out so that the stopper stem is free. Once this has been implemented, you can now pull the stopper unit up and out of the sink.
If possible, place a tub or a bucket under your sink trap before you remove the rod out. You should expect a flow of dirty water to run down the rod hole when you pull it out.
Your steps to clearing a blocked drain
Start off by pulling the stopper out of the sink. Don't be surprised if you find a lovely ball of hair and soap goop clinging to the stopper rod. Usually, a good de-gooping will solve the blocked drainage problem for you. Subsequently to clearing the rod, drop the stopper unit back into the drain opening. Replace the control rod, making sure that it is threaded in the right way back into the slot in the stopper stem by checking that the stopper lifts and drops as it should. To complete this, secure the rod using a nut and clip.
The drain stopper on the bathtub should be attached to the lever on the overflow outlet. You should be able to access the drain stopper by removing the overflow cover with a small screwdriver. You will now be able to pull up the drain stopper to remove the lever and the tub stopper.
If the drain is still draining pretty slowly, try the following: grab your plunger and a wet washrag. Fill the sink or bathtub about three inches deep with water. Hold the rag tightly against the overflow holes and plunge down hard roughly two to four times. Make sure the head of the plunger is right up against the surface so that you get a good vacuum when you plunge the drain. If you are lucky, that will do the trick fairly easily for you, and water will flow readily down the drain. If plunging doesn't work, it may be time to call in a professional plumbing service.
If you are having further issues, get in touch with a great plumber from Mr Plumber Sydney or Melbourne 24 Hour Plumbing.
In a fast-paced world where time is of utmost essence, busy families need products that can make their lives easier.
When it comes to designing your bathroom, selecting the right tub is an essential part of creating a lavish and comfortable space.
Adding a countertop basin to your bathroom can be a fantastic way to add some personality and style to your space.
A warm bath is one of life's simple luxuries, and when it comes to choosing the perfect tub for your bathroom, there are a lot of considerations to keep in mind.
As an essential part of our home, the bathroom deserves to be a place where we can relax and unwind after a long day.
Stone resin bathtubs sway the bathroom market with their unique, modern aesthetics mixed with an all-natural component.
If you're looking for a new countertop basin, you may be wondering if they come in different shapes and sizes.
If you are looking for the perfect solution to enhance the look and functionality of your bathroom, consider installing a solid surface tub.
If you have recently installed a solid surface tub in your home, then you have made a great decision.
About Us