Dry goods: solutions to the bathroom wash basin problem

The use rate of bathroom sinks is extremely high. Once a problem occurs, it is very annoying. It not only affects daily use, but also increases a lot of expenses. Today I will search for you about bathroom sink issues and their solutions.

● Wash basin cleaning and maintenance

When cleaning regularly, you can use a soapy nylon brush to scrub in a circular path, and then rinse thoroughly. Regular cleaning will help prevent water stains from hardening. If you want to get rid of stubborn stains, you can try non-abrasive cleaners such as dish soap, bleach, etc.

● What to do if the washbasin is blocked

Clogged washbasins and poor drainage are usually mainly caused by hair clogging the drainage holes

The solution: use first A chopstick pushes the foreign body out of the drain hole of the nozzle at the drain of the wash basin. If a foreign object is stuck in the gap between the drain hole and the drain pipe, you can turn the nozzle of the drain pipe, and at the same time use chopsticks to unclog the basin. Unscrew the upper fixing ring of the U-shaped drain pipe.

Pull down the lower part of the drain pipe to separate it from the upper part of the drain pipe. After turning the lower part of the drain pipe one direction, pull the drain pipe upward. In this way, the lower part of the drain pipe is separated from the drain hole on the ground. To facilitate the collection of obstructions, a filter screen is placed on the U-shaped tube. The drain pipe is inverted, and the shower head is flushed with a water column. After strong water injection, all hairs in the drain pipe will be collected in the filter. If the blockage is too serious, the U-shaped tube must be disassembled at this time.

● What to do if the wash basin is leaking

The wash basin is leaking because the hose or the angle raft connecting the wash basin and the water pipe connection has quality problems; the other is because the hose and the water pipe connection If the raw material tape is not wrapped too much or unevenly, the joint is not tight and water leakage occurs. The treatment method is: re-wrap the joint with raw material tape, or replace the angle raft and hose.

● Faucet cleaning and maintenance

The faucet on the wash basin is also the focus of cleaning. Many people only notice the surface of the faucet when cleaning the faucet, but the inside of the faucet is actually more important. To clean the inside of the faucet, first use a steel wire ball to wipe off the stains on the surface of the faucet, and then use a wrench to unscrew the foam net at the faucet outlet to clean up the debris inside.

● The flow of the faucet becomes smaller

If you feel that the flow of water is not smooth, it is likely to be caused by too much impurities accumulated at the foaming net. If you have never carried out such an operation or have not carried out such an operation for a long time, you will find that a lot of sand and even stones of various sizes have accumulated in the foam net. After cleaning, you will find that the water flow is much stronger than before.