Faenza Sanitary Ware Tips Let your bathtub 'prolong life'

To modern people, bathing is not only a kind of life, but also an art and a life enjoyment. Modern people's requirements for bathing are no longer confined to a pure clean body. When the requirements for health and comfort are becoming stronger, bathtubs are used more and more, and they occupy an increasingly important position in life.

The bathtub is in the bathroom space that is in contact with the body** It is a close bathing sanitary ware, which provides physical comfort and relaxation for modern people in bathing, but it will also bring trouble and inconvenience to life if care is not taken for maintenance . Here, Faenza sanitary ware gives the general consumers a suggestion to let you know more about the correct use and maintenance of the bathtub, and guarantee the life of the bathtub to the greatest extent.

FC035

Faenza Acrylic bathtub uses imported plates, the design matches with ceramic products, the surface is flat, high temperature resistance, acid and alkali resistance, impact resistance, easy installation, convenient maintenance .

Maintenance points:

Clean the bathtub every week to ensure that the bathtub stays dry and clean when it is not in use

▲Use neutral liquid detergent to clean the bathtub (do not use abrasion Ingredients and highly alkaline cleaners). Avoid using dark or strong corrosive liquids, avoid pigments immersed in the cylinder, or the cylinder is corroded

▲When cleaning, use a flexible cloth or a good sponge. Do not use a hard brush to avoid scratches. Marks

▲Acrylic bathtub** The high water temperature should not exceed 85℃

▲When the acrylic layer of the acrylic bathtub is scratched, use water scrubbing above 1500# Sanding, after cleaning, wipe with flannel dipped in toothpaste (buffing with cloth velvet or wool is better)

▲If the cast iron bathtub has scratches with rust spots, first remove it with decontamination powder Rust spots, then wipe with a dry cloth, and then apply a special adhesive for repairing the bathtub. Not only can completely remove rust spots, but also can avoid the expansion of scratches

FC038Q

Precautions for the use of massage bathtub

Faenza bathroom massage bathtub multifunctional The design also has shoulder massage, back waist massage, leg massage, etc., which integrate ergonomic form and function**, and the space is spacious as if you are in the ocean.

In order to make bathing safer and more assured, Faenza Sanitary Ware will interpret the precautions for the use of the jacuzzi for you, and provide you and your family with a good guarantee for the quality of the bathroom.

▲The water pump can only be started when the water level in the bathtub is at least 5cm above the nozzle immersion. It is strictly forbidden to run the pump idly, otherwise it is easy to cause the friction pair of the shaft sleeve and the mechanical seal of the water pump and the impeller seal ring to be burnt out

▲When performing hydromassage, do not put towels and other sundries in the bathtub to avoid the sundries being absorbed and blocking the massage system

▲If the bathtub massage function is not used for a long time, it should be done at regular intervals Run the massage water pump once to drain the remaining water in the pipe to avoid the growth of bacteria and affect your health.

▲When cleaning the acrylic massage bathtub, you should use a neutral detergent. It is forbidden to use the bathtub and metal accessories. With corrosive acid, alkaline, powder and other cleaning agents, rinse the bathtub with clean water after finishing, drain the accumulated water, and dry it with a soft cloth to prevent water accumulation in the pipeline and rust spots on the metal accessories.