KingKonree - Solid Surface Manufacturer of Sanitary Ware, Solid Surface Countertops & Sheets for over 25 years, innovation in moulding and thermoforming
How to Attach a Backsplash to a Vanity Top
The tailgate on the bathroom vanity protects the wall from spills and splashes.At the same time, the tailgate provides the perfect look for The Dresser and sink design.The key to installing the tailgate on your dresser is to stick it clean to the countertop and back wall, while ensuring that the tailgate is firmly in place, to provide you with the best moisture-proof seal.
Clean the rear edges and tailgates at the top of the dresser the part that will be attached and pay attention to removing any grease, soap residue and other dirt or dust.Wipe the tailgate and remove all residue of dirt, grease and adhesive.Set the tailgate in place to make sure it is appropriate.
Temporarily remove it from the dresser and place it face down on the work surface.Apply the beads of the polyurethane adhesive to the back of the dresser using the caulking gun.Apply a bead of silicone caulking agent to the dresser where the tailgate will sit.
Carefully and slowly squeeze the caulking pipe to ensure a fine and uniform caulking line that is not broken.Fix the tailgate in place and lean against the wall and vanity so there is no gap.If necessary, temporarily fix the tailgate with painter tape.
Before using the dresser, let the adhesive and caulking agent cure for at least 24 hours
About Us