loading

        KingKonree - Solid Surface Manufacturer of Sanitary Ware, Solid Surface Countertops & Sheets for over 25 years, innovation in moulding and thermoforming

How to choose a good bathroom mirror_construction process

The bath mirror is an indispensable part of the bathroom space. The clear and bright bath mirror gives people a good mood when dressing up. Don't look at the appearance of bath mirrors and ordinary mirrors. In fact, there are a lot of exquisiteness inside.

The appearance of the bath mirror is various, such as square, oval, egg circle, etc., or a single whole, mirror edge edging, mirror carved, exquisite and practical, or as a part of bathroom cabinet, with mirror lamp, The vanity cabinet creates a unified bathroom space. Compared with ordinary mirrors, bath mirrors need 'three proofings': waterproof, rust-proof, and anti-fog.

Ordinary mirrors show people’s images from a distance. It seems clear from a distance, but there are often subtle distortions and buoyancy in close observation. This is mainly due to the uneven coating of the mirror body. In addition, ordinary mirrors If it is placed in a humid place for a long time, it will become dim, and the coating will also fall off due to rust. As the place where the bath mirror is placed, it must be waterproof and rust-proof, so the coating layer usually adopts more advanced technology, and its pure silver coating will make the mirror surface clearer and the image more real. In addition, the plating layer must be closely combined with the lens body to have a good waterproof and rust-proof effect. When purchasing a bath mirror, you only need to observe the portrait at a close distance, move the line of sight up and down or left and right to see if the straight side object is bent or deformed, you can know the quality of the bath mirror coating.

Of course, the anti-fog function of the bath mirror is also very important. If you want to avoid the foggy mirror behind the bath, you must make the mirror anti-fog function. Most of the anti-fog bath mirrors sold in the home market use electric heating to prevent fog. After power is turned on, the temperature of the mirror surface is increased by the electric heating, and the fog evaporates quickly, so that the mirror surface cannot form a fog layer. But anti-fog bath mirrors are usually expensive.

So, is there any simple and effective way to prevent fogging of the bath mirror? There is an anti-fog film tailored for bathroom mirrors on the market. This is a semi-transparent polyester film that can generate heat after power on. The special conductive heating material is sealed in two layers of polyester film. It also applies electric heating effect. . The thickness of the anti-fog film is about 0.4 mm. It should be attached to the back of the bath mirror before use. Start from one end and apply it as flat as possible. The power switch of the anti-fog film should be connected in parallel with the front light of the mirror for easy use.


GET IN TOUCH WITH Us
recommended articles
Info Center Knowledge Project
no data


About Us

KingKonree is not only a professional China sanitary ware brand, but also a specialist focus on exporting service since it's establishment in 2000. The products we prize is the combination of quality and design.

 Company Info

Address:Room No. 2408-2508, Building 5A, Longguang Jiuzuan, Longhua District, Shenzhen, China

Zip Code: 518131

Tel: +86 (0)755-82875700

Fax: +86 (0)755-82875921

Email: cherry@kingkonree.com

All rights reserved © 2024 Kingkonree International China Surface Industrial Co., Ltd | Privacy Policy Sitemap
Customer service
detect