How to decorate and design the bathroom? 6 practical tips for bathroom decoration

How to decorate and design the bathroom? 6 practical tips for bathroom decoration

Release time: 2018-01-20 15:03:39; Update time:; Article source:; Views:

　　 Don’t underestimate the small bathroom, which is a very important part of the home. You should also pay attention to it when decorating. Don’t look at the small bathroom, but the decoration is really cumbersome. If you ignore some details , It is difficult to guarantee that there will be no problems.

6 practical tips for bathroom decoration

　　 There are several aspects to the construction details of bathroom decoration. Thresholds, waterproofing, floor tiles, circuits, walls, and floor drains are all key parts. These detailed construction techniques help to better achieve the decoration effect.

1. Bathroom threshold construction skills: The threshold is the top gateway of the bathroom, which plays the role of waterproofing and dividing space in the bathroom, and it also has the meaning of gathering wealth in Feng Shui.

　　The key points of the construction design of the threshold are first to pay attention to the slope of the upper surface of the threshold to the inside of the bathroom, so that the water can smoothly slide to the floor drain inside the bathroom.

　　 The second is to be the same width as the door frame, and the door frame must be the same thickness as the wall, so that the dimensions can be the same when laying floor tiles, which is very effective in preventing cracks.

2. Floor waterproofing construction techniques for bathroom floors: At present, the materials used for floor waterproofing are mainly waterproofing agents. When laying the bathroom waterproof layer, it should be laid 20 cm above the foot of the wall. The height of the waterproof layer cannot be lower than the height of the threshold.

　　 When reserved pipes on the floor, the waterproof layer should keep the reserved pipes. After the waterproof layer is finished and dried, cement mortar should be used as a primer immediately to prevent damage to the waterproof layer.

3. Details of laying floor tiles: When laying floor tiles, pay attention to the thickness of the joints of the floor tiles to be consistent, and to be aligned with the joints of the wall tiles, and the floor tiles must have a slope of drainage.

　　 If you install a bathtub in the bathroom, the front wall of the bathtub must be tiled with bricks. It is better to stick the floor tiles to the bottom of the wall first, and then stick the wall tiles to avoid cracks.

4. Bathroom circuit laying details: The wire joints in the bathroom should be hung with tin, and should be wrapped with waterproof tape and insulating tape to ensure safety and prevent leakage. All wire bodies must be covered with flame-retardant tubes, switches and sockets should preferably have moisture-proof boxes or be installed in dry areas.

5. Details of bathroom wall tiling: moisture-proof and waterproof treatment should be done before the wall is tiled, and the wall must be flat when tiling, and it must be seamed and aligned with the floor tiles to ensure the integrity of the wall and the ground .

6. Construction details of the bathroom floor drain: Generally, the reserved holes for drainage of new houses are relatively large when the new house is handed over, so it is necessary to pay attention to repairing the reserved holes for drainage to make it consistent with the floor drain purchased. In order to prevent hair, sludge, sand and other dirt from entering, the hole diameter of the refurbished floor drain grate should be controlled between 6-8mm.

(Source: China Sanitary Ware Network)

Previous post: Why is the floor drain blocked in the bathroom? What should I do if the bathroom floor drain is blocked?

Next: Bathroom cleaning is diligent and quick, and the bathroom cleaning is magnified.