How to paste the shower room glass explosion-proof film, Rifeng Sanitary Ware has a coup

How to stick the glass explosion-proof film in the shower room. Rifeng bathroom has a coup. The shower room has always been an indispensable bath tool for the home expert. For the home expert, experiencing life is nothing more than experiencing a comfortable and unique bathing process in the shower room. However, the self-detonation incident has become the most worrying thing for people, and their sense of security has seriously declined. What is an explosion-proof membrane? In fact, the explosion-proof membrane is one of the safety explosion-proof membranes. Its function is mainly used for building glass film in shower rooms, toilets and other fields. Tempered glass has a self-explosion rate of three-thousandths. Experts recommend consumers to avoid self-explosion of tempered glass to prevent The most effective way for glass to self-explode and minimize loss and damage is to paste a shower room explosion-proof film on the glass. The shower room explosion-proof film is pasted on the shower room tempered glass, and the broken glass is bonded in place until it is safely removed. , Thereby reducing possible human injuries and reducing losses caused by explosions. How to paste the explosion-proof film of the shower room? Prepare the preliminary work, including tools: tape measure, small wallpaper knife, spray bottle, water squeegee, squeeze plate, no horse riding, lint-free large towel, and then measure the size of the glass. The size of the glass film should be the same as that of the glass. Match the size, so as not to cut too much to waste. When cleaning the glass, a large lint-free towel is placed under the glass that needs to be cleaned to prevent water from flowing outside and soaking the wall. Cleaning the glass is the first important step in the film. Whether the glass is clean or not is related to the quality of the glass film. To paste the glass film, spray some water on the front and back of the explosion-proof film in the shower room to easily remove the attachments on the glass film caused by static electricity, then peel off the plastic film on the cut glass film, spray water, and paste On the glass, squeeze the water out from top to bottom, and then cut off the extra edges. To paste the glass film, spray some water on the front and back of the explosion-proof film in the shower room to easily remove the attachments on the glass film caused by static electricity. Then peel off the plastic film on the cut glass film, spray it with water, and paste it on the glass. Go up, then squeeze out the water from top to bottom, and then cut off the extra edges. Explosion-proof film is attached to the shower room, so you can feel relieved after taking a bath. Of course, the most important thing is the quality assurance of the product, and everyone should pay special attention to it when purchasing. For more sanitary ware related information, please visit the official website of Rifeng Sanitary Ware. (