How to use the bathtub better? Comparing bathtub materials1

With the improvement of people's living standards, many families will install bathtubs. A bathtub can bring a more comfortable bathing experience than a shower. Everyone wants to take a comfortable hot bath after returning home from get off work. So how is the bathtub better? What are the good maintenance methods? What are its materials? Next, the editor will give you answers one by one.

How to use the bathtub maintenance method

1. Pay attention to anti-corrosion: For the bathtub plate, it is the object that is relatively easy to corrode. No matter in normal use or in the cleaning process, you need to pay attention to it. Do not use strong acid or strong acid. Chemicals such as alkali and thinner. In the process of cleaning, general surface stains can be wiped off with paint thinner, turpentine, alcohol, or toothpaste.

2. Prevent the water temperature from being too high: If you use too hot water for a long time, it will affect the service life of the bathtub. The hot water temperature should not exceed 80 degrees. The normal method of use is to pass in cold water and then hot water.

3. Place debris to block: Don't let debris block the drain, you should clean the drain more to avoid clogging.

4. Polish with sandpaper for scratches: If there are scratches on the surface of the bathtub, apply polishing wax after sanding with water sandpaper.

5. Do not turn on without water: It is forbidden to start the water pump when there is no water in the bathtub. The water pump is easy to burn out when it is idling without water, because there is a rubber sealing ring in the water pump, which is easy to be damaged when it returns to heat.

6. Pay attention to the leakage and waterproof switch

The power supply line should meet the national standard and be equipped with a leakage protection switch. The power supply must have a good grounding function, the load capacity is 10A, and the switch socket should be waterproof. It is recommended to install it near the bathtub Bathtub control switch.

7. Pay attention to the maintenance of the power supply and motor.

After using the product, be sure to cut off the power supply to avoid damage to the computer system. The maintenance must be performed after disconnecting the power supply. Check the leakage switch every six months to ensure that the leakage safety protection switch works normal.

Bathtub material competition

1. Acrylic bathtub

This is the bathtub material most frequently used by modern people. Acrylic bathtub is made of organic materials. It has rich shapes, light weight, good surface finish, low price, and good heat preservation effect. The disadvantage is that the surface is easy to be flowered by hard objects. In order to overcome the shortcomings of acrylic non-wearing, some manufacturers have adopted imported high-brightness, high-hardness acrylic sheets for sanitary ware, which overcomes these shortcomings to a certain extent.

Second, cast iron bathtub

This type of bathtub is made of cast iron, and the surface is covered with enamel, so its weight is very heavy, durable, and not easy to generate noise, easy to clean, but the disadvantage is that the weight is too heavy. It is not easy to install and transport, and the cast iron bathtub is generally single in shape. Because of the complicated casting process, the price is also very expensive.

3. Wooden bathtub

This kind of solid wood bathtub often has strong thermal insulation, and the tank is relatively deep, which can fully infiltrate the body. Wooden bathtubs generally use hard, dense wood, and cedar is the most common one on the market. The solid wood bathtub can give people a refreshing feeling, and the solid wood bathtub is easy to clean and is natural and environmentally friendly. The disadvantage is that the price is slightly higher and maintenance is required, otherwise it will deform and leak. The daily maintenance of wooden bathtubs is also very simple. Solid wooden bathtubs are wet and afraid of dryness, so they should be soaked with water to avoid exposure to the sun.

Four. Steel Bathtub

This kind of bathtub is made of traditional bathtub material. It is made of special steel plate through stamping, and the surface is made by enamel treatment. It has the characteristics of wear resistance, heat resistance and pressure resistance, and the price is Relatively cheap, the weight is between the cast iron bathtub and the acrylic bathtub, and it is lightweight and easy to install. The disadvantage is that the thermal insulation effect is not as good as the iron cast bathtub, and the water injection noise is relatively large, but because of its high cost performance, many consumers will choose steel bathtubs when decorating.

V. Ceramic bathtub

The ceramic bathtub is made of ceramic, so its bulky, fertilizer and fragile characteristics have been gradually replaced by acrylic, cast iron bathtubs and steel bathtubs, and have tended to be eliminated.

Summary: After reading the introduction of the editor, I believe that everyone is more impressed with how the bathtub is better and the material of the bathtub is good. I hope it can help you to make a better purchase.