How to use the bathtub better? Comparing bathtub materials

As people's living standards improve, many families will install bathtubs. A bathtub can bring a more comfortable bathing experience than a shower. Everyone wants to take a comfortable hot bath after coming home from get off work. So how is the bathtub better? What are the good maintenance methods? What are its materials? Next, the editor will give you answers one by one.

How to use the bathtub maintenance method

I. Pay attention to corrosion protection: For the bathtub plate, it is the object that is relatively easy to corrode, whether it is in normal use or in the cleaning process. It should be noted that chemicals such as strong acid, strong alkali, thinner, etc. cannot be used. In the process of cleaning, general surface stains can be wiped off with paint thinner, turpentine, alcohol, or toothpaste.

2. Prevent the water temperature from being too high: If you use too hot water for a long time, it will affect the life of the bathtub. The temperature of the hot water should not exceed 80 degrees. The normal method of use is to first pass in cold water and then heat it. water.

3. Place debris and block: Don't let debris block the drain, you should clean the drain more to avoid blockage.

4. Polish with sandpaper for scratches: If there are scratches on the surface of the bathtub, apply polishing wax after sanding it with water.

Fifth, do not turn on when there is no water: It is forbidden to start the water pump when there is no water in the bathtub. The water pump is easy to burn out when idling without water, because there is a rubber sealing ring in the water pump, and it is easy to be damaged when it returns to heat when idling.

Six. Pay attention to leakage water-proof switch

The power supply line should meet the national standard and be equipped with a leakage protection switch. The power supply must have a good grounding function, the load capacity is 10A, and pay attention to the switch The socket is waterproof. It is recommended to install a bathtub control switch near the bathtub.

Seven. Pay attention to the maintenance of the power supply and motor

After using the product, be sure to cut off the power supply to avoid damage to the computer system. The maintenance must be performed after disconnecting the power supply. Check the leakage switch every six months Circumstances, ensure that the leakage safety protection switch works normally.

Bathtub material competition

1. Acrylic bathtub

This is the bathtub material most frequently used by modern people. Acrylic bathtub is made of organic materials. It has rich shapes, light weight, good surface finish, low price, and good heat preservation effect. The disadvantage is that the surface is easy to be flowered by hard objects. In order to overcome the shortcomings of acrylic non-wearing, some manufacturers have adopted imported high-brightness, high-hardness acrylic sheets for sanitary ware, which overcomes these shortcomings to a certain extent.

Second, cast iron bathtub

This kind of bathtub is made of cast iron, and the surface is covered with enamel, so its weight is very heavy, it is durable, and it is not easy to generate noise and is easy to clean , But the disadvantage is that the weight is too heavy, it is not easy to install and transport, and the iron cast bathtub generally has a single shape, because the casting process is more complicated, the price is also very expensive.

3. Wooden bathtub

This kind of solid wood bathtub often has strong heat preservation, the tank is relatively deep, and can fully infiltrate the body. Wooden bathtubs generally use hard, dense wood, and cedar is the most common one on the market. The solid wood bathtub can give people a refreshing feeling, and the solid wood bathtub is easy to clean, natural and environmentally friendly. The disadvantage is that the price is slightly higher and maintenance is required, otherwise it will deform and leak. The daily maintenance of wooden bathtubs is also very simple. Solid wooden bathtubs are wet and afraid of dryness. If necessary, they should be soaked with clean water to avoid exposure to the sun.

Four. Steel bathtub

This kind of bathtub is made of traditional bathtub material, using special steel plate to be stamped and formed, and the surface is made by enamel treatment. It is abrasion-resistant and resistant. It has the characteristics of heat and pressure resistance, the price is relatively cheap, the weight is between the iron cast bathtub and the acrylic bathtub, and the texture is light and easy to install. The disadvantage is that the heat preservation effect is not as good as the iron cast bathtub, and the water injection noise is relatively large, but because of its overall high cost performance, many consumers prefer steel bathtubs when decorating.

V. Ceramic bathtub

Ceramic bathtubs are made of ceramics, so they are bulky, fertilizer and fragile. They have gradually been replaced by acrylic, cast iron bathtubs and steel bathtubs. It has already become obsolete.

Summary: After reading the introduction of the editor, I believe that everyone is more impressed with how the bathtub is used better, and the material of the bathtub is good. I hope it can help you to buy better.