KingKonree - Solid Surface Manufacturer of Sanitary Ware, Solid Surface Countertops & Sheets for over 25 years, innovation in moulding and thermoforming
Is it better to have a trap for a squatting toilet or not?
Release time: 2017-12-22 14:38:55; Update time:; Article source:; Views:
In the purchase of squatting toilets, what everyone is most worried about is whether it is unblocked or not. If the sewage is not discharged smoothly, it will be blocked every three days, which is really unbearable.
So some friends have doubts about squatting pans with traps, and worry that the performance of the squatting pans is not good. Let’s follow along with the editor to find out whether the squatting pan is equipped with a trap or not. Which is better?
1. The working principle of the trap is to use the turn to form a 'water seal
The structure of the squatting pan without trap is straight-through, and the smell is easy to return. The general size of the squatting toilet trap is: length: 585mm*width 470mm*height 296mm.
2. The role of the trap is to prevent the odor generated by the waste in the pipeline from entering the room through the pipe. Generally speaking, traps will be installed in the pipeline laying of the building itself, and the squatting will bring its own water storage. Bend is actually a double-layer insurance.
3. The ideal height of a squatting pan with a trap should be in the range of 250-280mm, and a high-end brand squatting pan should reach 300-320mm.
This size range includes the volume depth of the squatting pan, the height of the backwater (the diameter of the drain determines the total height of the backwater), the standards used for these two depths (height) are not intended to be high ( Thin) as high as possible.
4. What should I do if the squatting pan with trap is blocked? It depends on whether the blockage is serious or not.
If it is not very serious (the standard is that the water can seep away quickly), there is a toilet plug on the market that is made of soft plastic. Close the nozzle tightly, and then add water to the toilet to seal it. Use air pressure to pull up according to the deformation, generally it can be dredged in one or two strokes.
If it is more serious (the standard is that the water basically does not seep away), the pipe dredging pipe must be used. By turning it by hand, the other end is rotated to pull out the stuff that is blocked in the pipe.
Toilets are usually narrow, and the ventilation performance is not very good. Therefore, there must be certain requirements for the deodorization performance of sanitary ware. The trap of the squatting pan has a similar function.
Source: China Sanitary Ware Network
Previous post: What should I do if the toilet base leaks as soon as it is flushed?
Next: What should I do if there is too much hair in the bathroom? 7 small coups to easily get rid of worries