Please pay attention to these in the bathroom decoration of Yangzi Bathroom

Please note that although these bathrooms are small but have many functions, the bathroom space is most afraid of errors in the installation process, which will lead to the need to destroy all of them and start over again in the future. This is not only time-consuming, but also unnecessary. Cost. Today, I will teach you how to buy and inspect bathroom equipment to create a perfect bathroom. The most important thing in the bathroom is to make a good waterproof washbasin. 1. Pay attention to the number of water outlets to choose according to the number of water outlets to prevent troublesome replacement afterwards. For non-porous washbasins, the faucet should be installed on the countertop or on the wall of the countertop. The cold and hot water pipes of the single-hole basin are connected to the single-handle faucet through a hole. The three-hole basin can be matched with a single-handle hot and cold faucet, or a double-handle hot and cold faucet. It is recommended to choose different basins according to the number of outlet holes, in case they cannot be used when they are bought back. 2. Confirm the water and electricity diagram No matter what kind of sanitary equipment, it must be confirmed before the water and electricity diagram is completed, so as to avoid the situation of changing the pipe afterwards. At the same time, the installation must be carried out according to the drawings. Each bathroom appliance must have an installation drawing and a standard aperture. As long as it is installed according to the instructions, there is no problem. 3. Confirm the water inlet height when installing the washbasin. Pay attention to the overall height relationship. The height of the water inlet system should be made according to the standard artwork. Generally speaking, U-shaped pipe fittings need to be in place to ensure that the water pipe and the wall drainage hole are effectively combined and waterproof, so as to avoid water leakage when water enters. In addition, if any damage is found during installation, it should be dealt with immediately to avoid subsequent damage or rupture. 4. Pay attention to the edge of the washbasin and the countertop to be waterproof. At the same time, if there is a storage cabinet under the countertop washbasin, the cabinet should be made of waterproof material as much as possible or the joints should be waterproofed. You can put silicone on each joint to protect each joint from water seepage. Fill the gaps between basins and countertops with silicone to make waterproof treatments. 5. Try to use stainless steel metal fittings. The metal fittings installed should be made of stainless steel or corrosion-resistant materials, and the bolts and the basin should be fixed with rubber gaskets to absorb and buffer the impact of the bolt when the bolt is locked, and reduce the appliance. Probability of damage. Small TIPS single hole, double hole u0026 three hole faucet can choose single hole, double hole or three hole according to the place where the faucet is installed on the basin. If the hole dug in the basin is three-hole, a three-hole faucet must be installed. If there is only one hole dug in the basin, a single-hole faucet is installed. Toilet 6. Note that the parts package/installation package of the installation equipment should not be lost or missing. In addition, check whether each part has the function of waterproof and water-stopping, especially the screw material should be load-bearing and rust-proof. If there are carpentry and cement painting projects in progress, the toilet should be properly installed and protected, which can play a protective role. 7. Pay attention to the pipe distance before installation