Precautions for the installation of the sink

The installation of the wash basin is very important. The proper installation height is very convenient for us to use. If it is too low, long-term bending will not be good for the waist and spine, especially if there are elderly or children at home. Pay attention to these things. Therefore, during installation, it is best that the top of the wash basin should be about 80cm above the ground. Under normal circumstances, this is a more appropriate height, but if there are special circumstances at home, it can also be determined according to the specific situation. For example, the elevation of family members is generally higher, then the height of the wash basin can be adjusted to a higher point.

　　Wash basin installation method:

　　 When installing the wash basin, please ask professionals to install it to avoid improper installation and affect normal use. Under counter basin It is better to open the hole in the factory than on the spot, and some brand distributors of wash basins will also provide installation services. Before the decoration, the owner must fully consider the drainage location of the wash basin, whether it is a wall row or a floor row. The water pipes of the wall row are in the wall body, which does not affect the appearance, but the sewage discharge effect of the ground row is better.

　　 If it is a wall row, be sure to plug the pipe into the drain pipe to prevent overflow due to poor water pipes. When installing, pay attention to whether there is a hole in the middle of the drain. If the ceramic basin is installed, the water is easy to overflow, and the glass basin does not need to worry about this problem. It should be noted that the basin has a sewage return bend device, which has the function of treating sewage and isolating peculiar smell. It is necessary to distinguish whether the return bend of the sewer pipe is in the ground (S-curve) or the wall return (P). Bend), and then choose the matching basin.

　　Washing table installation precautions:

　　1. Leave enough distance between the two basins, otherwise it will affect each other when used.

　　2. Because of the staggered support under the countertop of the counter basin, the disassembly and assembly are complicated. If the length of the countertop is small, it is difficult to guarantee the installation quality during installation.

　　3. The overall appearance of the under-counter basin is clean and easy to take care of after installation. Pay attention that the joint between the basin and the countertop is a place where dirt and dirt are easier to hide to prevent mildew.

　　4. The under-counter basin has higher requirements for the installation process. Firstly, the mounting bracket should be customized according to the size of the under-counter basin, and then the under-counter basin should be installed in a predetermined position. After the bracket is fixed, it will be opened. The countertop cover of the hole is fixed on the wall on the undercounter basin (usually an angle iron is used to support the countertop and then fixed with the wall).

　　The general method of washing basin cleaning:

　　 First prepare cleaning tools such as rags, detergents, and small brushes. Since the stopper ring of the sink on the surface of the wash basin is the easiest place to hide garbage, if there is garbage, use a clip to clamp the garbage first; then clean the surface of the wash basin, wring it out with a rag and detergent, and wipe it finely; The plug ring of the drain can't be wiped with a rag. At this time, a small brush and detergent can be used. After cleaning, please use a dry cloth to wipe clean water stains on the surface.

　　 I hope that through the introduction of the article, I hope that the owners who are about to be renovated will be able to help some, and make the new home decoration exquisite and warm. I wish everyone a happy life.