Rifeng bathroom installation guide to avoid pits

Rifeng bathroom installation guide to avoid pits. Bathroom installation is a very headache for many people. After all, we don’t learn much professional knowledge for a bathroom installation, but it is also a big problem that we don’t know anything. So Rifeng summarized the following practical tips for everyone. ①Be sure to make it waterproof, and then conduct a closed water test. ② Determine the location of water pipes and wires in advance during installation, and avoid these lines. ③Leave more drainage holes under the bathtub to prevent water leakage. ④Pay attention to the water inlet height when installing the washbasin. ⑤When installing the toilet, pay attention that the pipe distance is generally 30~40cm, and the socket should be reserved in advance for the smart toilet. ⑥ When drilling holes on the tiles, first use a glass drill, steel nails, or hammers to gently break the tiles to penetrate the tiles, and then use an electric hammer to drill holes to avoid breaking the tiles. ⑦Before installing the faucet, clean the sundries in the water pipe, check whether the water pipe is damaged, and be careful not to install the hot and cold water pipes backwards. ⑧When installing the floor drain, first take out the floor drain core to avoid falling into the sundries, adjust the far and near positions, and fill it with cement mortar at a long distance, and increase the drain pipe; short-distance installation requires cutting water pipes; the slope difference between the floor drain and the ground In 1%~3%. ⑨It is better to have a splash-proof cover at the location of the socket to prevent water vapor from entering the socket and causing danger. (