Rifeng Sanitary Ware teaches you three small coups to solve the clogged shower

Rifeng Sanitary Ware teaches you three small tricks to solve the problem of clogged showers. The essential items in the shower showers are used every day. After the shower has been used for a long time, problems will inevitably occur. The shower in the bathroom is suddenly blocked, what should I do? Do you still feel helpless? Today, I will teach you three ways to evacuate the spray. The solution for the shower insert: 1. Use acupuncture. If your shower is blocked by a small hole, let the faucet let out some water to see if the hole is blocked, then you must open the shower head. There are many small holes on the shower head. This is where the water comes out. . Use the prepared needle to pierce the impurities in the perforation until there are no impurities in the shower hole. This method is the most direct and best method of operation. near. 2 If it can be soaked in vinegar and is blocked by a large number of holes, it is very laborious to pierce the holes with a needle and cannot solve the problem. It is recommended that you use acid dust removal to solve this problem. Prepare some white vinegar and pour the white vinegar into the pot until it can be submerged with the shower. After soaking in the vinegar for about 10 minutes, the scale in the shower head can be removed. Third, the method of using lubricating oil is more aimed at the serious problems of metal porous nozzles, so it is recommended to use wd-40 to prevent rust and corrosion. This lubricating oil has good affinity and permeability with metals and leaves a protective film. Let the shower never stop. This method is more suitable for showers that are not made of stainless steel in the home. The above are three ways to solve the problem of blocking the shower head. Have you learned it? I hope the above can help you. (