Sanitary Maintenance Tips (2)

Sanitary Maintenance Tips (2)

Release time: 2017-12-04 15:34:10; Update time:; Article source:; Views:

Toiletries and sanitary wares are used more frequently. If they are not properly maintained, they are prone to ageing. Today I have compiled some tips on sanitary ware maintenance to help you do a good job in sanitary ware maintenance.

　　1. In order to ensure the accurate construction and installation of the toilet, please try to seal it with glass glue first, such as cement mortar, the mortar ratio should not be greater than 3:1 to prevent the toilet from cracking due to excessive stress.

　　2. Do not flush newsprint, paper changing pads, sanitary napkins and other items that are easily clogged into the sanitary ware.

　　3. The sundries accidentally falling into the toilet should be taken out in time, and the skin should be used to remove air immediately when it is blocked.

　　4. Do not make hard utensils or rough fabrics come into contact with ceramic products, and do not knock or impact.

　　5. Wipe the attached dirt with a cleaning agent on schedule. If it can't be washed off, use a brush to remove it to keep the surface clean.

　　6. It cannot be used and stored in water below zero degrees Celsius.

　　7. Computer bath room: The most important thing is to prevent its leakage and check whether the circuit is insulated on time.

　　 8. Don't put extra things inside the bathtub. (Towels, silk fabrics, etc.).

　　9. In order to avoid damage to the bathtub and piping, do not use sulphur, acid-base body soap or organic solvents.

　　 10. If there is water in the corners of the bathroom counter, wipe it off with a dry cloth in time.

　　Bathroom maintenance tips: how to properly clean the toilet

　　Every time the toilet is flushed, it seems that the turbulent flow of water has carried away the dirt and bacteria. However, studies have shown that the number of bacteria on the inner wall of the toilet that has just been flushed is still as high as 100,000, so cleaning the toilet is healthy Important measures.

　　 1. Before cleaning the toilet, ventilate the room. Open all the windows in the room and remove everything on the toilet tank.

　　2. Put on household rubber gloves.

　　 Tip: If necessary, you can wear goggles or regular eyes to prevent liquid from splashing into your eyes.

　　3. Flush the toilet with clean water first, and then open the toilet lid.

　　4. Pour toilet cleaner on the inner wall of the toilet in a circular motion, cover the toilet lid and soak for a few minutes. During this period, began to clean the outside of the toilet.

　　5. Rub the disinfectant on the outside of the toilet, the water tank, the flush button, the edge of the toilet, and the toilet gasket, all can't be missed.

　　6. Tip: Never mix cleaning agents, because different types of cleaning agents will produce toxic gas when mixed.

　　7. Wipe the area on the toilet that has been wiped with the disinfectant with a paper towel.

　　 Tip: For some dead spots on the toilet that are not easy to clean, you can use an old toothbrush to clean them.

　　 8. Now open the toilet lid and use the toilet to scrub the inner wall of the toilet, especially the various water outlet holes inside the toilet. It is important to clean.

　　9. Press the water button, flush the toilet again with clean water, and use the water from the toilet to flush the toilet. The toilet is cleaned.

Previous post: Tips for sanitary maintenance: simple tricks to get it done easily

Next post: Is the solid wood bathroom cabinet easy to crack? Hundreds of sanitary processes overcome cracking problems