Special Porcelain Sanitary Ware: A bit cold and not cracking

Special porcelain sanitary ware: not cold and cracked. Tips for maintenance of household faucets. With the continuous invasion of the cold current, the temperature drops sharply. Whether it is the cold in the north or the wet and cold in the south, the daily use of the faucet brings some inconvenience! The valve core of the water pipe exposed to the low temperature environment for a long time is prone to different degrees of freezing and cracking. Special porcelain bathroom special reminds everyone: in winter, we should pay more attention to the maintenance of the faucet! Will the low temperature cause the faucet to freeze and crack? NO! Generally, due to the following conditions, the faucet will freeze and crack in the use environment below 4℃: 1. After the water test in the early stage of the project, the remaining water in the faucet has not been drained; 2. The faucet is installed outdoors and the water inlet valve is not closed. , And did not provide anti-freeze protection; 3. The room was ventilated after renovation, the windows were not closed at night, and the inlet valve was not closed to drain the remaining water from the faucet; 4. The indoor temperature was low, the inlet valve was not closed, Exhaust the remaining water. Do you still have an impression? ? How to prevent the faucet from freezing and cracking? In order to prevent the faucet from freezing and cracking at low temperatures, the following measures can generally be taken: 01. During normal use, 1. Try to ensure that the indoor temperature is above 0 ℃; 2. The outdoor faucet can use cotton and linen fabric, old cotton clothing, cotton wool Wait for the insulation material to thicken and wrap the faucet; 3. For rooms where the indoor temperature is lower than 0℃, turn off the indoor water meter valve and drain the remaining water in the pipe; 4. Remember to close the kitchen, the bathroom outside and the windows of all shaded rooms at night , Ensure that the indoor temperature is above 0°C. 02. During the decoration or construction process 1. If the installation temperature of the faucet on the project site is lower than 0℃, it is recommended to temporarily not install the faucet or install the faucet temporarily or to drain the water in the pipeline after testing the water; 2. If it is currently under renovation During the process, since there is a one-way valve in the hot and cold water device, the construction personnel must be asked to assist in removing the faucet from the wall. 3. If a thermostatic faucet is installed in the home, in addition to draining the remaining water in the tap water pipe, the thermostat must also be drained separately to prevent the cold water from swelling and freezing. For a long time, with its rich experience and professional ability in leading production and technological innovation, Teci is committed to providing users with more sanitary products that can cope with cold challenges, while providing comprehensive quality assurance services to bring people continuous , Smooth water experience. In winter, the temperature is low. In order to avoid the various inconveniences caused by freezing and cracking of the faucet, you should pay more attention to the 'cold resistance' performance of the product when buying sanitary products. The special porcelain sanitary products with leading technology are Your good choice! The Three Guarantees Law stipulates that damage caused by force majeure such as natural disasters is not covered by the insurance, so everyone must pay attention to it. Due to the bad weather and cooling, there are many families who have been renovated but have not moved in. Please turn off the main gate of the water meter and the electric switch to let out the remaining water. In cold weather, rapid freezing will easily cause the remaining water in the water pipe to freeze and expand in volume. Water meters, water pipes, toilets, valve cores, and valve bodies may burst, especially the concealed pipes on the north wall and outdoor faucets. (