the best way to clean cultured marble

Like educated pearls, educated marble is human. -made.
With marble-like texture and marble-like luster-
Expensive cultural marble is a completely different product. Non-
Porous and coated with protective gel -
The beauty of a coat, elegant marble, lies in its low quality. -maintenance.
There is no need for special cleaners or special tools.
What it really needs is attention to prevent soap scum from accumulating and scratching on its bright surface.
Most detergents are suitable for marble culture, but detergents containing abrasives are not encouraged if their appearance and luster are durable.
The cultivated marble is not mined from the earth.
The cultured marble is made up of 75% marble, but the marble is dust, not solid surface.
Marble dust is mixed with resin in a large vertical mixer or mixing drum.
Add the color according to the customer\'s specifications, and pour the mixture into the mould before the color is completely mixed.
After drying, marble is gelatinous. coated.
Most cultured marble countertops are installed in the bathroom rather than in the kitchen, where hot pots can easily damage the surface.
Clean the marble surface regularly with warm water and a small amount of soap, and wipe it with texture or ultra-fine fiber towel.
Window cleaners can also restore the gloss of the surface, but read the label of the cleaner and avoid using cleaners containing a small amount of abrasive.
Place a small circle of detergent on the fingertip and then rub it to test its wear resistance.
If you feel any gravel, don\'t use it.
Cleaning pads, powders and even liquid abrasive cleaners can damage surfaces.
When a coating may be applied to the counter, alkaline or acidic-
Alkaline detergents should be avoided.
Soap residues accumulate in showers and bathtubs.
Do not use abrasives to clean the cultured marble surface to remove scum.
After each shower, use wipers for regular maintenance. Mix 50% vinegar and 50% water in the spray bottle.
Spray and wipe small area shower with soft cloth. then rinse.
Use another clean cloth to wipe the light back into your shower or bathtub.
If your water supply at home contains minerals, it\'s hard water.
Let it accumulate and cause dyeing.
Remove these stains with 50/50 vinegar and water solution, but leave them for at least 30 minutes.
Wet cloth should wipe off the water stains, if not, repeat them.
Do not use abrasives.
Just as you use a rubber brush in the shower to avoid soap accumulation, wipe the counter after each use to prevent fouling with hard water. Do-it-
Their own wax, old toothpaste, and even gel capsules leak to the surface can be cleaned with alcohol.
Testing in the hidden area of the counter. After passing the test, apply alcohol on the cotton ball or cloth, gently wipe the sticky spot and rinse it out.
If the spots look dim, use suede cloth to restore luster.
If years of wear and tear have dimmed the marble surface, treat it as a car and wax it.
Smear wax;
Let it dry according to instructions and remove it with clean, moist superfine fibers or cotton cloth.
Use the second clean cloth to polish and restore luster.
For severely damaged counters, mechanical buffers are used to restore gloss.