The installation of the bathtub The installation strategy of the bathtub1

After returning home after a busy day, if you can lie in the bathtub and take a comfortable hot bath, it will not only relieve fatigue, but also improve your mood. It is really a good enjoyment. This kind of life is very comfortable and cozy even after thinking about it? What are you waiting for? Let's take a look at the bathtub installation guide.

Bathtub placement form: freestanding and embedded

Bathtub installation, first of all, you need to understand the bathtub placement form. Generally, there are two types of bathtub placement: independent and embedded. The placement type means that the bathtub is directly placed on the bathroom floor. This method is convenient for construction and easy to repair. It is suitable for use when the ground has been decorated. Embedded is to embed the bathtub fully or partially into the countertop. Compared with the embedded bathtub, it is easy and convenient to enter and exit, and is suitable for the infirm.

The installation points of a free-standing bathtub

The installation of a free-standing bathtub is relatively simple. The installation of water inlet and outlet is the key issue. Before installation, it is necessary to reserve or modify the bathtub water outlet and other passages, and then place the bathtub on two wooden strips, connect the upper and lower water, try to fill the bathtub with water, and check whether the water leaks. If there is no leakage, the wooden strips can be taken out. The bathtub is basically installed.

The installation points of the embedded bathtub

The installation point of the embedded bathtub is to be waterproof. The main steps are: After making the tubing of the bathtub, in order to achieve the waterproof effect, the slotted part should be repaired. It is best to check whether there will be water leakage within a day or two; pave the ground in the normal order; use foam brick cushion A good built-in bathtub, the height is generally within 60cm; pay attention to the 250x300mm normal size manhole in the position of the drain pipe.

Precautions for bathtub installation

1. Check whether the bathtub level, front and rear, left and right positions are appropriate, check whether the drainage facilities are appropriate, and install it firmly. During the installation process, the bathtub and the drainage facilities should be protected from dirt, bumps, and blockages. Do not splash the sparks from the angle grinder and spot welder on the bathtub, otherwise it will damage the glaze and affect the beauty of the bathtub.

2. The massage bathtub must be installed with a grounding wire and a leakage protection switch. When installing, pay attention to connecting the electric plug and waterproof the surrounding pad to avoid leakage accidents. Before connecting the water pipe, do a power-on test of the motor to check whether the sound meets the requirements.

3. Before installing the bathtub with a bracket, check whether the floor of the bathtub is flat; after placing the bathtub in the reserved position, use a level and adjust the support leg nut until the bathtub is level.

4. Pay attention to the protection of the bathtub. In the process of bathtub installation and house decoration, you can cover the surface of the bathtub with soft materials. Do not stand on the bathtub or place heavy objects on the edge of the bathtub to prevent damage to the bathtub. The bathtub can be used 24 hours after installation.

A bathtub is a plumbing device for bathing or showering, and is usually installed in a household bathroom. In recent years, as acrylic heated bathtubs have gradually become popular, bathtubs of various shapes have begun to appear. The above method is suitable for the installation of bathtubs of various shapes.