|Three points to keep in mind when installing a shower room to give your family a more comfortable life

|Remember the three points when installing the shower room. It is a lifelong task to take care of your family. Every step is worthy of your care. Know the relevant precautions in advance and protect your family’s daily life. Showering is the family’s daily life. Keep in mind three things in the shower room. It drains quickly and is not prone to leakage, so that your family can live a more comfortable life. When installing the embedded stone base in the shower room, most workers choose the method of pasting and fix the stone base on the tiles with glass glue. This method is relatively simple and easy, but the effect is not good. It is better to bury the stone foundation with bricks, which can effectively prevent water leakage in the bathroom. This construction method is a test of the skill of the tiling master, especially the curved stone foundation. Since workers are required to cut the tiles on site, deviations will occur if they are not careful, so a professional master must be selected. Grooving around the marble is a higher-end method of grooving around the marble, choosing to use marble instead of tiles. But this is not simply laying the marbles directly and laying it out. You should also pay attention to the left and right grooves to speed up the drainage speed. Even if there is a lot of water on the ground when bathing, because the middle is higher than the four sides, the water will quickly flow down the grooves. In addition, several rows of striped grooves should be processed on the marble surface to prevent slippage. This design is more suitable for families with elderly, children or pregnant women. It is not only safe and practical, but also beautiful and eye-catching. Test the water to see the effect The shower room should be installed in strict accordance with the assembly process. After installation, check whether the sliding door or the sliding door is parallel or vertical. Check whether the connection between the shower room and the building structure is firm, symmetrical, whether the opening and closing is smooth, there is no gap or water seepage phenomenon, the shower room and the bottom basin should be tightly sealed with silica gel. The last thing is to test the water. The purpose of the water test is to ensure the smoothness and sealing of the launch. You can fill the bottom with water and let it go after a while. If the bottom is not properly sealed, water will seep out. The bathroom is a place where water is often used. Once the leakage occurs, the consequences will be disastrous. It will not only affect the daily life of the family, but also bring great troubles. Keep the above three points in mind when installing the shower room. The shower room will protect your family with you , To live a more comfortable life for the family. (