To buy a bathtub, the bathroom area should be allocated reasonably in advance

In order to better enjoy the bathroom time, many people divide the bathroom space at home. The designer suggested that when the toilet space is about 10 square meters, a dry and wet area can be set. If it is less than 10 square meters, it is recommended to use a glass partition or a whole bathroom to design a more reasonable partition for the toilet.

Generally speaking, rectangular bathtubs take up more space. When choosing, you must first see whether the bathroom can be put down. Of course, generally speaking, such bathroom space can be divided into dry and wet partitions, so you don’t need to consider its moisture. Influence, but the depth, width, length and contour of the bathtub of the same size when choosing are also different. If you like the depth of the water, the position of the waste outlet should be higher. If it is too low, once the water level exceeds this height, the water will flow out from the sewage outlet, and the water depth of the bathtub is difficult to reach the required depth. If you have an elderly person or a baby in your home, it is best not to choose a bathtub that is too deep or too large.

The wet and dry areas of the bathroom space should be clearly distinguished

At the same time, the bathtub has no skirts, one skirt and two skirts. Be sure to pay attention to the direction of the skirt when buying. According to the location of the drain and the wall, determine whether to choose the left skirt or the right skirt. Otherwise, the wrong choice will cause a lot of trouble to the installation.

The bathtub materials on the market are generally: acrylic (acrylic) bathtubs, steel bathtubs, cast iron bathtubs, ceramic bathtubs and wooden tub bathtubs. At present, acrylic plastic bathtubs have become the mainstream products in the market. They will not rust, will not be corroded and are very light. This type of bathtub is made of a thin sheet of material, usually glass fiber underneath, which is processed by a vacuum method, with a thickness of 3mm to 10mm, the advantage is that it is warm to the touch, can maintain the water temperature for a long time, and is easy to wipe clean. In addition, experts reminded that the quality and thickness of the material are related to the firmness of the bathtub, which cannot be seen by visual inspection. You need to press and step on it yourself. If there is a feeling of sinking, it means that the hardness is not enough.