What are the bathtub installation methods and how to choose the bathtub

The bathtub is used for showering and bathing. It has been widely used by many families. There are many shapes and brands of bathtubs on the market. So how do we buy bathtubs? What are the bathtub installation methods? Let me know what are the bathtub installation methods, and how to choose a bathtub!

What are the bathtub installation methods?

1. Before installing the bathtub, first determine its flat position As well as the height of the upper mouth, you can first use the powder elastic thread to pop the horizontal line of the bathtub upper mouth on the wall. The height of the upper mouth is generally 50 cm to 60 cm. In order to avoid inconvenience in future use, the height of the upper mouth should not be too high.

2. Take out the floor drain cover of the original drain hole on the ground, and then install the floor drain of the bathtub drain hole. The gap of the floor drain can be filled with putty during installation.

3. Before placing the bathtub, place four bricks at the bottom of the bathtub, and then place the bathtub firmly on the brick surface. At the same time, it should be aligned with the level of the bathtub to prevent water from accumulating after the bathtub is used. . After the above steps are completed, it is necessary to install the drain pipe of the bathtub. The drain pipe of the bathtub includes iron pipes and plastic pipes, and hoses such as rubber hoses can also be used. However, no matter what kind of pipe is used, the drain pipe must be extended. Into the floor drain, in order to prevent the water discharged from the bathtub from overflowing and causing water to accumulate at the bottom of the bathtub, the hole should be closed.

4. Lay bricks on the outside of the bathtub and seal it. The outside bricklaying requires the brick body to be retracted by 2-3 cm from the side of the cylinder. It should be noted that when laying bricks, it should be hidden Leave 15-20 centimeters at the location or the location that is convenient for repairing the drain outlet, and make a small door to prevent easy cleaning and maintenance when the bottom of the bathtub fails.

5. After the bricklaying is completed, you can use cement mortar to scrape the green grass on the facade. After it dries a little, you can wipe the base of the tiles, and finally you can use ordinary tiles.

How to buy a bathtub

1. When buying a bathtub, you can listen to the designer’s suggestions. You should also decide according to the area and shape of the bathroom, and then choose a space to occupy Place it in a smaller position.

2. When buying a bathtub, look at whether the material is strong, whether the inner wall is smooth, dense, free of scratches and cracks, etc. Generally good bathtub materials are thicker and have good bearing capacity.

3. If it is not necessary, the functional choice of the bathtub is best to be single. If you choose a massage bathtub, it depends on the noise level during operation and whether the massage area is similar to your body shape. To adapt, it is best to experience it first when buying.

4. The purchase of a bathtub depends on whether there is anti-skid treatment at the bottom of the bathtub, which is related to the safety of future use, so it cannot be ignored.

5. It depends on the after-sales service and product quality of its products. It is recommended that you try to buy some big brands as much as possible. The big brands not only guarantee the quality, but also have better after-sales service, such as whether there are problems after the purchase. Door-to-door repairs and the like, but these conditions must be negotiated with the merchant when buying the bathtub.

The editor summarizes: The above is about the bathtub installation methods and the related content of how to purchase the bathtub. I hope it will be helpful to everyone. If you want to know more related content, you can follow Qijia.com.