What are the bathtub materials commonly used bathtub materials

The bathtub is an indispensable bathroom product in our bathroom decoration. It not only allows us to release our fatigue, but also plays a good decorative effect. There are many bathtub brands in the market, so what are the bathtub materials? We are going to make a specific inquiry today.

Bathtub material 1. Acrylic bathtub

Made of artificial organic materials, it is characterized by rich shapes, light weight, good surface finish, and low price, but due to the existence of artificial organic materials The shortcomings of poor high temperature resistance, poor pressure resistance, non-abrasion resistance, and easy aging of the surface, so the surface of the acrylic bathtub is rarely discolored after more than three years of use. The advantage is that it is cheap and good in heat preservation. The disadvantage is that it is easy to change color. Another disadvantage is that it is easy to hang dirt and is difficult to clean. The noise is loud when the water is discharged.

Bathtub material 2, wooden bathtub

This kind of solid wood bathtub often has strong heat preservation, the tank is relatively deep, and can fully infiltrate the body. Wooden bathtubs generally use hard, dense wood, and cedar is the most common one on the market. The solid wood bathtub can give people a refreshing feeling, and the solid wood bathtub is easy to clean, natural and environmentally friendly. The disadvantage is that the price is slightly higher and maintenance is required, otherwise it will deform and leak. The daily maintenance of wooden bathtubs is also very simple. Solid wooden bathtubs are wet and afraid of dryness. If necessary, they should be soaked with clean water to avoid exposure to the sun.

Bathtub material 3. Ceramic bathtub

Ceramic bathtubs are made of ceramics, so they are bulky, fertilizer and fragile. They have gradually been replaced by acrylic, cast iron bathtubs and steel bathtubs. Replacement has become obsolete.

Bathtub material 4, cast iron cylinder

Made of cast iron, the surface is covered with enamel, so the weight is very large, and it is not easy to produce noise during use; because the casting process is more complicated, the cast iron cylinder is generally shaped It is relatively simple but very expensive. Because the cast iron cylinder is very heavy and difficult to move and carry, the installation process is very troublesome, often requires hoisting, and it is difficult to move and repair after installation, and ordinary consumers buy less. However, because of the thick wall of the cast iron cylinder, its outstanding feature is its good heat preservation performance. Dirt is not easy to hang, easy to clean, good heat preservation; but the price is the highest. The noise is small when the water is discharged.

Bathtub material 5. Steel bathtub

The traditional material for manufacturing bathtubs. The steel cylinder is formed by pressing a whole piece of bathtub special steel plate with a thickness of about 2 mm, and the surface is treated with enamel. And made, it has the characteristics of wear resistance, heat resistance, pressure resistance, etc., the weight is between the cast iron cylinder and the acrylic cylinder, the heat preservation effect is lower than that of the cast iron cylinder, but the service life is long, and the overall cost performance is higher. This kind of cylinder has an enamel surface, which is not hydrophilic or oily, so the surface finish and hardness are very high, it is very wear-resistant and scratch-resistant, and it is not easy to adhere to dirt, and it is very easy to clean. The price is in the middle, not easy to hang dirt, easy to clean, not easy to fade, long-lasting luster. But insulation is not good. The noise is in the middle when the water is discharged.

The above is a general introduction to the bathtub material. I hope it will be helpful to you. More wonderful decoration information is available on Qijia.com, so stay tuned.

More articles:

Will Faither Sanitary Ware recommend Faither Sanitary Ware

Which brand of shower room is the best shower room brand

Would you recommend Wrigley bathroom cabinets for Wrigley bathroom cabinets?

Which material is good for bathing wooden tubs? How to choose bathroom products?