What are you afraid of blocking the washbasin? Here is the method you want!

In daily life, the wash basin is often clogged. The clogged wash basin and poor drainage are usually caused by hair clogging the drainage holes. The solution is to use a chopstick to remove foreign objects at the sink of the wash basin. Push out the drain hole of the nozzle. If a foreign object is stuck in the gap between the drain hole and the drain pipe, you can turn the nozzle of the drain pipe, and at the same time use chopsticks to unclog the basin. Next, the editor will give you a detailed introduction of what to do if the wash basin is blocked and the maintenance points of the wash basin. I hope to help you.

1 What to do if the washbasin is blocked

1. If the washbasin is blocked and the drainage is not smooth, the reason is usually that the hair blocks the drainage hole, but first Use a chopstick to push the foreign body out of the drain hole of the nozzle at the sink of the wash basin. If foreign matter such as hair jams the gap between the drain hole and the drain pipe, you can turn the nozzle and use chopsticks to dredge the sink. .

2. If the wash basin in the bathroom is blocked, connect the tap water with a hose to the clogged sewer pipe, seal the surrounding with a cloth, open the tap water, and use the pressure of the tap water to flush it away.

3. The dredging method of using soda and vinegar: pour a quantitative amount of soda powder into the sewer, and then pour a quantitative amount of vinegar. After the soda reacts with the vinegar, acid is generated and the stickiness in the pipeline can be removed Foreign bodies and other substances.

4. Log dredging method: Insert a log into the water pipe, and put a certain amount of water in the pool, and move the log up and down quickly without interruption, under the action of suction and pressure , The dirt in the pipeline will be washed away.

5. Air pump dredging method: When the kitchen sewer is blocked, the hose of the air pump can be inserted into the sewer, and then a small amount of clean water can be put into the pipe continuously, and the pipe can be quickly Was unblocked.

6. Use water pressure dredging method: take a plastic tube (or rubber tube) with a diameter of 10 mm and a length of about 1 meter, one end is tightly sleeved on the faucet, and the other end is inserted into the blockage of the pool Place a cloth around the rubber tube, plug the drain of the pool tightly, turn on the faucet and screw it to the maximum, the water pressure is enough to wash away the blockage.

2 Maintenance points for wash basins

1. The maintenance methods of wash basins vary with stone material

a. Granite wash basins

Granite is a very durable and resilient stone. For regular cleaning, you can use a soapy nylon brush to scrub in a circular path, and then rinse thoroughly. Regular cleaning will help prevent water stains from hardening. If you want to get rid of stubborn stains, you can try non-abrasive detergents such as dish soap, etc., and be sure to avoid using strong alkalis such as ammonia. If you encounter rust problems caused by iron ions contained in water, cookware, etc., you can use a detergent containing oxalic acid to remove it. Do not use bleach directly on the granite.

b. Marble wash basin

Marble has an elegant luster. Because the stone has pores, it is difficult to maintain the luster of the marble. Sealing helps prevent the stone from absorbing liquid, but acidic liquids such as orange juice, lemon, soda, various foods, and common household cleaners will corrode the stone, so do not use acidic cleaners on the marble. To avoid water stains, rinse and dry the sink after each use. The only way to remove corrosion and water stains is to ask professionals to re-grind and re-polish. For routine care, you can use soft, bleach-containing liquid detergents or ordinary household detergents.

2. The protection has a period of time and needs to be repainted regularly.

Although the protective agent is not a panacea, it is absolutely impossible not to brush the protective agent on the washbasin. Even if the best protective agent is damaged by hot water, alkaline water (soap), and various bath materials for a long time, the effect will be reduced. Under normal circumstances, the effect of handwashing protection can last for about 1 year, and different degrees of pollution and disease will appear in 2 years. Therefore, protection is not done once and for all, and protection should be regularly repaired. The small bathroom sink does not require the construction of a professional stone care company. It is recommended to use 'stone brightening care agent' and apply it by yourself. The price is not expensive, just wipe it with a small piece of cloth, which can play the role of cleaning, protection, and polishing at the same time, which is very convenient.

3. Prevent long-term retention of water

After use, you should empty the water in the basin and wipe the water on the countertop. This habit can keep the stone surface clean and reduce pollution.

4. Choose the right cleaning agent

Stones are afraid of strong acids and alkalis. It is well known that the ingredients of cleaning agents should not be ignored when cleaning stone. Generally, cleaning agents contain acid and alkali. If cleaning agents with unknown ingredients are used for a long time, the surface of the stone will lose its luster and may even cause lesions. For example, if marble is alkaline, use alkaline detergent, while granite is acidic, use acid detergent.

5. Prevent scratches

Scratches from hard objects and steel balls will reduce the protective effect of stone and should be avoided as much as possible.

6. Special circumstances

If the sink has deep pollution, severe loss of light, surface aging, microcracks, cracks, or damage, please ask a professional stone care company to deal with it.