What glue is good for marble countertops

　　 The demand for stone decoration in modern architecture is increasing, and the beauty and firmness of stone decoration are constantly improving. Therefore, ordinary cement can no longer meet the needs of architectural design. The birth of stone glue is used to meet the requirements of stone paste. There are several different varieties on the market, such as marble glue, AB glue, silica glue, etc. are difficult to construct, not durable, and easy to age. The stone glue is able to bond with the stone very well, the construction is easy, the service life is long, and it is more suitable for large-scale stone construction.

　　Stone glue

　　1. Roman stone glue is a kind of stone for larger culture, artificial stone, water absorption rate A modified tile adhesive developed for higher stone and pasting inside and outside walls.

　　2. Has a certain anti-sag performance.

　　3. It has high bonding strength and a certain degree of flexibility, and can prevent the alkaline components in the adhesive from penetrating into the stone and causing disease on the surface of the stone.

　　4. Has good water resistance and anti-aging properties.

　　5. Environmentally friendly, non-toxic and friendly to the environment.

　　6. Has a certain waterproof and anti-tragic function.

　　Applicable scope

　　 is mainly used for pasting large cultural stones, artificial stones, and high water absorption on internal and external walls Stone and so on.

　　Base surface requirements

　　1. The base surface should be dry and clean, free of oil, wax, oil and other loose materials.

　　2. The base surface should have a certain surface strength, and require basic flatness and perpendicularity.

　　Construction process

　　1. Mix the Roman stone glue and water in a ratio of 4:1, stir into a uniform paste, and let it stand for 2-3 minutes. Stir again.

　　2. Scrape the glue evenly on the working surface with a toothed scraper, and apply about 1 square each time, then knead the tiles or stones on the base surface and adjust the parallelism of the tiles , It should be pasted from bottom to top when pasting.

　　3. If it is required to paste tiles or stones with a deep back groove, in addition to the working base surface, glue should be applied to the back groove of the tiles or stone to avoid hollowing.

Common technical parameters of 　　 dosage

　　1, the specific engineering situation of each square dosage is different, the adjustment time (minutes) 10

　　2, use 3*3mm teeth Type scraper about 1.5~1.8Kg/m2 cooling time (minutes) 5

　　3, using 6*6mm toothed scraper about 2.8~3.0Kg/m2 surface drying time about 2 hours, container state White uniform powder

　　4. Use 10*10mm tooth scraper about 4.0~4.5Kg/m2 shrinkage% ≦0.50

　　 The above dosage is when the base surface is flat The recommended dosage of

　　Notes

　　 1. Be sure to check the condition of the base surface before construction.

　　 2. The construction temperature should be used in an environment of 5℃~40℃.

　　3. If the base surface temperature is too high (40℃) during summer construction, the base surface should be moistened with water first, so as not to lose water too quickly and affect the construction quality.

　　 4. It is strictly forbidden to mix the dried glue with water before using it.

　　 5. The surface of the board can be cleaned with a damp cloth about 1 to 2 hours after construction.

　　6. If the construction is on the ground, you can step into the follow-up construction only 24 hours after the completion of the construction.

　　 is stored in a cool and dry place. It can be stored for one year after unsealing.

　　Packing 25kg/pack

　　After reading the above article, I hope it will help you in your life.