KingKonree - Solid Surface Manufacturer of Sanitary Ware, Solid Surface Countertops & Sheets for over 25 years, innovation in moulding and thermoforming
The demand for stone decoration in modern architecture is increasing, and the beauty and firmness of stone decoration are constantly improving. Therefore, ordinary cement can no longer meet the needs of architectural design. The birth of stone glue is to meet the requirements of stone paste. There are several different varieties on the market, marble glue, AB glue, silica glue, etc. are difficult to construct, not durable, and easy to age. The stone glue is able to bond with the stone very well, the construction is easy, the service life is long, and it is more suitable for large-scale stone construction.
Stone glue
1. Roman stone glue is a kind of stone for larger culture, artificial stone, water absorption rate A modified tile adhesive developed for higher stone and pasting inside and outside walls.
2. Has a certain degree of anti-sag performance.
3. It has high bonding strength and certain flexibility, and can prevent the alkaline components in the adhesive from penetrating into the stone and causing disease on the surface of the stone.
4. Has good water resistance and anti-aging properties.
5. Environmentally friendly, non-toxic and friendly to the environment.
6. Has a certain waterproof and anti-tragic function.
Scope of application of
is mainly used for pasting large cultural stones, artificial stones, and stones with high water absorption rate on internal and external walls.
Base surface requirements
1. The base surface should be dry and clean, free of oil, wax, oil and other loose materials.
2. The base surface should have a certain surface strength, and it is required to have basic flatness and perpendicularity.
Construction process
1. Mix the Roman stone glue and water according to the ratio of 4:1, and stir into a uniform Paste-like, let it stand and mature for about 2-3 minutes and then re-stir it.
2. Scrape the glue evenly on the working surface with a toothed scraper, and apply about 1 square each time, then knead the tiles or stones on the base surface and adjust the parallelism of the tiles , It should be pasted from bottom to top when pasting.
3. If it is required to paste tiles or stones with a deep back groove, in addition to the working base surface, glue should be applied to the back groove of the tiles or stone to avoid hollowing.
Notes
1. Be sure to check the condition of the base surface before construction.
2. The construction temperature should be used in an environment of 5℃~40℃.
3. If the base surface temperature is too high (40℃) during summer construction, the base surface should be moistened with water first, so as to prevent the glue from losing water too quickly and affecting the construction quality.
4. It is strictly forbidden to mix the dried glue with water before using it.
5. About 1 to 2 hours after construction, the surface of the board can be cleaned with a damp cloth.
6. If the construction is on the ground, you can step into the follow-up construction only 24 hours after the completion of the construction.
is stored in a cool and dry place. It can be stored for one year after unsealing.
Pack 25kg/bag
After reading the above introduction, I believe you already know how to choose.